I am trying to get my Windows Media Center Remote control to work with my DirecTV satellite reciever, and I am not getting any sound on Live TV. So far what I have done is connect the coax cable from the wall to my satellite reciever in the Input. Connected another coax cable from the satellite reciever to the Input of my TV Tuner card on my computer. Then I also use a S-video connnection from my TV tuner card to my satellite reciever. I get up into Setting Up A TV Signal in Windows Media Center. Everything goes through just fine, except for I need to setup the remote. Now, I am also using the IR reciever for the remote, and have the IR cable connected form the reciever, and covering the sensor for the satellite reciever. When I have to conifure my remote for the satellite, and has a listing of codes I need to choose form. All of them did not work at all. I press a three digit code, and the red IR sensor flickers, but does not respond to channel changing. I went ahead and skip this exercising. I do get a TV signal, and the picture comes clear. The guide also went through just fine to. So the internet and cable connections should be good. However, when I go to Live TV. I am not getting no sounds at all! Any adivse would be much appreciated. If no answers, do you know of anyone I can contact? DirecTV will not help me either. Thanks.