Nero Error

This is a discussion on Nero Error within the Windows 7 Support, Windows Vista Support forums, part of the Tech Support Forum category. I used to burn CDs perfectly fine on the same system, but now it always gives me this "fixation error".


Closed Thread
 
Thread Tools Search this Thread
Old 06-16-2011, 03:49 AM   #1
Registered Member
 
Join Date: Nov 2008
Posts: 38
OS: Vista


Exclamation

I used to burn CDs perfectly fine on the same system, but now it always gives me this "fixation error". Can anyone help please with this annoying issue.
The Error Log is as follows:


______________________________________________________



Windows Vista 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.2
Internal Version: 8, 3, 2, 2
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GH22LS30>Version: 1.01 - HA 1 TA 0 - 8.3.2.2
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RAM GH22LS30>Version: 1.01 - HA 1 TA 0 - 8.3.2.2
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GH22LS30 E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1996MB (2044176kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.6.2011
JukeBox (MP3, WMA, Nero Digital)
11:31:46 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:31:46 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:31:46 #3 Text 0 File Burncd.cpp, Line 3238
HL-DT-ST DVD-RAM GH22LS30
Buffer underrun protection activated

11:31:46 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

11:31:46 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 0. Length: 199328 -> 199326.

11:31:46 #6 Text 0 File Burncd.cpp, Line 3568
Turn on Track-At-Once, using CD-R/RW media

11:31:46 #7 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 199328 -> 199326.

11:31:46 #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

11:31:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 199328 -> 199326.

11:31:46 #10 Text 0 File DlgWaitCD.cpp, Line 292
Medium type in the drive: Unknown
Lowest/Highest CLV write speed: 3x/199327x
Recorder min/max supported write speed: 4x/9274316x

11:31:46 #11 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 199327 ( 44:19.52)

11:31:46 #12 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

11:31:46 #13 Text 0 File DlgWaitCD.cpp, Line 2936
Recorder: HL-DT-ST DVD-RAM GH22LS30;
CDRW code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: A3 00 CF, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 2C DC, 2: 14 A4 4A, 3: 00 00 00

11:31:46 #14 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:31:46 #15 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 199328 (199328) = #199328/44:17.53
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 199326 blocks [E: HL-DT-ST DVD-RAM GH22LS30]
--------------------------------------------------------------

11:31:46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [E: HL-DT-ST DVD-RAM GH22LS30] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 408530944, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 199328 | 0 | 0x00
199328 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:31:46 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 199328 -> 199326.

11:32:07 #18 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.


11:32:07 #19 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:32:07 #20 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:32:07 #21 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

11:32:07 #22 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

11:32:07 #23 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

11:32:07 #24 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

11:32:07 #25 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 10x (1,500 KB/s)

11:32:07 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:32:07 #27 Text 0 File MMC.cpp, Line 22530
Set BUFE: Buffer underrun protection -> ON

11:32:07 #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

11:35:30 #29 SPTI -500 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
CDB Data: 0x2A 00 00 00 1D 40 00 00 20 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x19f53ac0: Len x10000
0xAD 2A 29 57 89 FC 99 99 2E B4 59 2B 51 9E DB B9
0x33 FD DF 7F FF AD E0 1D 00 16 AD FC 55 25 64 8E
0x40 B7 DA 9F 62 18 5D B5 E0 AA 29 CE D1 79 C5 59

11:35:31 #30 SPTI -1114 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
CDB Data: 0x2A 00 00 00 1D 40 00 00 20 00 00 00
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x0da50dc0: Len x10000
0xAD 2A 29 57 89 FC 99 99 2E B4 59 2B 51 9E DB B9
0x33 FD DF 7F FF AD E0 1D 00 16 AD FC 55 25 64 8E
0x40 B7 DA 9F 62 18 5D B5 E0 AA 29 CE D1 79 C5 59

11:35:31 #31 CDR -1114 File Writer.cpp, Line 306
Reset occurred
E: HL-DT-ST DVD-RAM GH22LS30

11:35:31 #32 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
E: HL-DT-ST DVD-RAM GH22LS30

11:35:31 #33 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack

11:35:31 #34 Text 0 File MMC.cpp, Line 17306
<HL-DT-STDVD-RAM GH22LS30> start Close Track #2

11:36:49 #35 SPTI -1119 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 09
Buffer x056e8340: Len x20

11:36:49 #36 CDR -1119 File WriterStatus.cpp, Line 375
Track following error
E: HL-DT-ST DVD-RAM GH22LS30

11:36:49 #37 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation

11:36:49 #38 Text 0 File WriterStatus.cpp, Line 384
falling back to disc fixation

11:36:49 #39 Text 0 File MMC.cpp, Line 17306
<HL-DT-STDVD-RAM GH22LS30> start Close Track #2

11:36:49 #40 SPTI -1047 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 64

11:36:49 #41 CDR -1047 File WriterStatus.cpp, Line 375
Illegal mode for this track
E: HL-DT-ST DVD-RAM GH22LS30

11:36:49 #42 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation

11:36:49 #43 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 10x (1,500 KB/s)

11:36:49 #44 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:36:54 #45 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

11:36:54 #46 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

__________________
PakPanjabi is offline  
Old 06-16-2011, 07:17 AM   #2
TSF Team, Emeritus
 
TheGift73's Avatar
 
Join Date: Oct 2006
Location: Lewes UK
Posts: 1,539
OS: Windows 7 Ultimate X64 and x86 SP1 & Windows XP Pro SP3

My System

Send a message via Skype™ to TheGift73

Hi PakPanjabi,

From the outputted logs it's pointing to a hardware error.

2 things to try:-
  • Different media (different make of disk on which to burn)
  • Broken CD/DVD Reader

Quote:
11:36:49 #35 SPTI -1119 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 09
Buffer x056e8340: Len x20
__________________
TheGift73 is offline  
Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
XP Anti-Virus 2011
I have this Virus called XP Anti-Virus 2011, i restarted my computer and tryed safe mode, but the start menu wont load in any mode, i cant open Firefox to download any anti virus or anything it blocked it, all my icons/start menu is gone it just shows background. Ive tryed looking on google but...
Plus2112 Inactive Malware Help Topics 13 06-10-2011 08:34 AM
[HELP]BSoD Error With Unknown Driver kskvhx.sys
051611-33571-01.dmp 5/16/2011 9:27:12 AM DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1 0xbea77000 0x00000002 0x00000000 0x83e30ccb kskvhx.sys kskvhx.sys+4ccb 32-bit C:\Windows\Minidump\051611-33571-01.dmp 1 15 7600 145,888 This is my minidump after a BSoD :/ I can't find the driver for...
IzFluffy BSOD, App Crashes And Hangs 5 05-18-2011 01:54 AM
error from upgradation to oel 6 from oel5_6
--> Missing Dependency: libiso9660.so.5()(64bit) is needed by package xine-lib-1.1.19-2.el5.rf.x86_64 (installed) java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.115.i386 from installed has depsolving problems --> Missing Dependency: python(abi) = 2.4 is needed by package...
csayantan Linux Support 1 02-20-2011 09:04 PM
Virus redirecting all of my pages.
My computer is completely screwed! First no sound now this! Almost every time I try to do something on the internet my page is getting redirected to something else! I always have to rush to click the X button to stop the page from loading. But I want a permanent fix! Please help.
TheresMoreToMe Resolved HJT Threads 26 01-26-2011 04:48 PM
Need some help. Virus/malware Thanks!
:upset: Tons of popup windows saying this file is infected and that file is infected, do I want to open up my security software (and this isn't my CA security suite doing this). Even if I'm using Firefox random windows in IE will open with (******.com/porno.com/adult.com). Hardly any...
R_Willis Inactive Malware Help Topics 7 01-20-2011 09:50 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is on
Smilies are on
[IMG] code is on
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Post a Question


» Site Navigation
 > FAQ
  > 10.0.0.2


All times are GMT -7. The time now is 08:44 PM.


Copyright 2001 - 2014, Tech Support Forum

Windows 7 - Windows XP - Windows Vista - Trojan Removal - Spyware Removal - Virus Removal - Networking - Security - Top Web Hosts