Tech Support Forum banner
Status
Not open for further replies.

[SOLVED] ram help

1K views 8 replies 4 participants last post by  yaker2000 
#1 ·
i have an old asus sk8v mobo and have got all the hardware i need except the ram. it has to be specific registered ram otherwise it wont boot. (as i have found out after a very long time changing lots of bits, like cpu, etc).
here is the list:

256MB ATP AB32L72Q8SQB3S SAMSUNG SS K4H560838D-TCB3(ECC)REG

512MB ATP AB64L72Q8S8B3S SAMSUNG DS K4H560838D-TCB3(ECC)REG

1024MB ATP AB28L72T4SQB3S SAMSUNG DS K4H560438D-TCB3(ECC)REG

1024MB ATP AB28L72P4SMB3C Infineon DS HYB25D256400BT-6B(ECC)REG

512MB TwinMOS M2S5J18C2AWB5F0811C-T Winbond DS W942508CH-6(ECC)REG

256MB Kingston KVR333X72RC25/256 Infineon SS HYB25D256809BT-6B(ECC)REG • •

512MB Kingston KVR333X72RC25/512 Micron DS MT46V64M4TG-6TC(ECC)REG • • •

1024MB Kingston KVR333X72RC25/1024 DS D644DWH-60(ECC)REG • •

512MB CORSAIR CM72SD512RLP-2700/S SAMSUNG DS K4H560838D-TCB3(ECC)REG • • •

1024MB CORSAIR CM74SD1024RLP-2700/S SAMSUNG DS K4H560438D-TCB3(ECC)REG • •

256MB Apacer 77.10632.112 Infineon SS HYB25D256800BT-6B(ECC)REG • • •

512MB Apacer 77.10732.112 Infineon DS HYB25D256800BT-6B • •

1024MB Apacer 78.01053.112 Infineon DS HYB25D256400BC-6SSS26366 • • •


i cant seem to track any down. does anyone know of anywhere online i can source the ram from. i would prefer 1g sticks but will settle for 512mb just to get it working. its been a project i have been working on for a very long time and is my first build and i have made it from mostly from scrap as to learn more.

please help. thanks in advance
jake
 
See less See more
#3 ·
Re: ram help

If you are wanting more than 4gb of ram in that board you will need to change to BIOS settings

1. AGP Aperture must be set to 64mb no higher.
2. PCI Delay Transaction must be disabled.

Anything other than this and your ram wont be able to go above 2gb.

Thanks,
Altie
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top