Go Back   Tech Support Forum > Hardware Support


Post New Thread
Threads in Forum : RAM and Power Supply Support Forum Tools Search this Forum
  Rating Thread / Thread Starter Last Post Reverse Sort Order Replies Views
 
Tempestshade
Thanks for the vote of confidence fellas >>>>> but I alwasy
10-22-2006 07:31 PM
by linderman Go to last post
8 1,211
 
alex_748
Do you have another video card if so give it a try, this
10-22-2006 07:25 PM
by Doby Go to last post
11 6,454
Mistake
BlackBeauty
BlackBeauty you really got this narrowed down now, good job
10-22-2006 07:20 PM
by Doby Go to last post
33 6,611
 
v-six
i havent noticed. They havent went down though, i spent £40
10-22-2006 07:07 PM
by HawMan Go to last post
1 776
 
ImmortalZero
Upgrade your power supply. I'd recommend no less than 550W
10-21-2006 10:46 PM
by jnob Go to last post
1 891
 
juwanshahir
if the light on the m/b is not glowing you have either no
10-21-2006 10:03 AM
by dai Go to last post
10 1,328
 
HardwareNewbie3
Alright, so my mobo has 4 slots. Slots 1 & 2 = Dual
10-20-2006 09:30 PM
by HardwareNewbie3 Go to last post
7 3,757
Cry
ahwanpandey
Closed
10-19-2006 08:28 PM
by TheMatt Go to last post
3 1,966
 
kiteflyer
check that you are seating it properly when the clips click
10-19-2006 05:21 PM
by dai Go to last post
1 905
 
charliepage
no leave the old out completly and just use the new stick
10-19-2006 05:10 PM
by dai Go to last post
9 3,840
 
scottydont2841
ok cheers dai
10-19-2006 10:09 AM
by scottydont2841 Go to last post
2 1,107
EEK!
mrowley
Cheap psu's can cause alot of undesirable results
10-18-2006 07:38 PM
by Doby Go to last post
4 2,736
 
Meestho
Hi Meestho, Here are acceptable voltages from your
10-18-2006 07:16 PM
by Tumbleweed36 Go to last post
21 2,555
 
FCB
OK thanks, so I'll just buy a new pc
10-18-2006 07:15 PM
by FCB Go to last post
9 1,420
 
mc900
I personally would go for a Fortron 600 watt PSU at
10-18-2006 06:05 PM
by linderman Go to last post
5 1,106
 
kvscorpio
Yep yep yep. I was afraid of that. Shaving off psu
10-18-2006 02:22 PM
by kvscorpio Go to last post
3 1,222
 
Scoobler
Well to my supprise, biostar have gotten back to me with
10-18-2006 03:29 AM
by Scoobler Go to last post
9 8,917
 
l0n3w0lf00
what brand 500w psu did you buy ? is there another power
10-18-2006 01:16 AM
by Fr4665 Go to last post
3 1,166
Confused
Jester57
You're very welcome. Don't hesitate to ask any other
10-17-2006 07:53 PM
by Indoril Nerevar Go to last post
4 1,586
Pencil
bradleyp
heat is normally the cause of this you need to check your
10-17-2006 06:15 PM
by pharoah Go to last post
1 1,808
Question
socabch
well if you have a system that is killing power supplies id
10-17-2006 06:10 PM
by pharoah Go to last post
1 988
 
SiteToSee
Thanks for your help. I determined it was the Power
10-17-2006 11:10 AM
by SiteToSee Go to last post
3 1,061
 
Meaven
Usually overclocking RAM doesn't give a noticeable boost in
10-17-2006 10:18 AM
by Cellus Go to last post
2 3,219
 
alphonso
Look for a Compaq part # on the power supply and do a
10-16-2006 08:34 PM
by Terrister Go to last post
3 2,339
 
Indoril Nerevar
Well Done Indoril!!:4-clap: Glad you got it sorted....I
10-16-2006 08:32 PM
by chauffeur2 Go to last post
9 2,670
 
pistik79
It sounds like an incompatability issue, either with the
10-16-2006 06:33 PM
by jnob Go to last post
1 3,991
 
milehile
Some RAM is not compatible with other RAM sticks. So that
10-16-2006 07:38 AM
by Snake21605 Go to last post
4 1,248
Grin
override_50
Just make sure when you look at the layout of your tower to
10-15-2006 05:47 PM
by Cellus Go to last post
8 3,265
 
HawMan
i have a 400W antec PSU. But when i plug it into the wall
10-15-2006 05:27 PM
by HawMan Go to last post
3 1,157
 
chronicskillz3k
k thanks all
10-15-2006 12:16 PM
by chronicskillz3k Go to last post
5 1,197
 
carsey
RAM Heatspreaders are a little weird that way - they're
10-15-2006 10:49 AM
by Cellus Go to last post
5 11,867
 
GarnetCompy
That red one my next upgrade, give me a month... :grin:
10-14-2006 03:32 PM
by jnob Go to last post
16 1,532
 
Sterbik
I agree, your best option is to replace both 256MB chips
10-14-2006 02:29 PM
by jnob Go to last post
2 1,304
 
ja5219
you will most likely find PC3200 aka DDR400 will work in
10-13-2006 01:56 PM
by linderman Go to last post
2 1,279
 
Mandragora
Ahh, that's what I thought. Fair enough then, I won't mess
10-13-2006 06:05 AM
by Mandragora Go to last post
2 1,504
Mistake
Philthy1
Tech Specs Package Type Logical Type 184-pin DIMM
10-12-2006 08:32 PM
by OMGmissinglink Go to last post
3 4,466
 
DAW57
You do not want to manually set the ram voltage !!! run on
10-12-2006 05:54 PM
by OMGmissinglink Go to last post
5 11,034
 
B617
could try the last bios version "Version 1013" if doesn't
10-11-2006 08:09 PM
by OMGmissinglink Go to last post
3 1,569
 
sg80
Double post.
10-11-2006 07:38 PM
by koala Go to last post
2 1,384
 
Lungboy
personal
10-11-2006 06:04 PM
by forcifer Go to last post
5 1,621
 
BeerzGod
at only 65% the added figure would have to be 50%
10-11-2006 04:40 PM
by dai Go to last post
6 1,528
 
jason591
Glad you got it sorted!!!
10-11-2006 09:22 AM
by carsey Go to last post
8 2,088
 
mattipler
haha good to know that it worked have fun with more ram
10-11-2006 01:38 AM
by Fr4665 Go to last post
6 18,350
 
Antneedshelp!
Closed. The user is getting help
10-10-2006 12:52 PM
by TheMatt Go to last post
2 1,728
Question
John McE
Hi, That is great news. Those power supplies can
10-10-2006 12:03 PM
by Tumbleweed36 Go to last post
4 1,957
 
93rmurray
check processor temps in bios, check processor temps shut
10-09-2006 12:13 PM
by OMGmissinglink Go to last post
7 4,143
 
chauffeur2
Hi Fr4665, Thanks to dai's expert input, all has been
10-09-2006 02:14 AM
by chauffeur2 Go to last post
4 2,368
 
carsey
That one has ended. Remember that your motherboard has only
10-08-2006 02:40 PM
by TheMatt Go to last post
8 1,892
 
signman
Thanks, you have released me from worry. ALthough probably
10-08-2006 08:52 AM
by signman Go to last post
4 1,853
 
SaigaShooter
Great glad you got it fixed, your welcome
10-07-2006 10:11 PM
by Doby Go to last post
9 5,105
Post New Thread

Display Options Moderators
Showing threads 11851 to 11900 of 11908 Moderators : 4
Forum Tools Search this Forum
Search this Forum :

Advanced Search

New posts New posts More than 25 replies or 300 views Hot thread with new posts
No new posts No new posts More than 25 replies or 300 views Hot thread with no new posts
Closed Thread Thread is closed  
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is on
Smilies are on
[IMG] code is on
HTML code is Off

Post a Question


» Site Navigation
 > FAQ
  > 10.0.0.2


All times are GMT -7. The time now is 06:39 AM.


vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 2001 - 2015, Tech Support Forum

Windows 7 - Windows XP - Windows Vista - Trojan Removal - Spyware Removal - Virus Removal - Networking - Security - Top Web Hosts

 

Partially Powered By Products Found At Lampwrights.com