Reformat SSD, What about the sofware RAID on 2 other drives? Hi,
I currently have my OS (Win 7 Ultimate - 64bit) installed on my SSD. Using the Windows RAID tool, I set up a RAID 1 (Mirror) with 2 other 1TB drives. When I reformat my SSD and reload my OS again, what will happen to the array? Should I unplug the drives before I begin reformatting? Break...
Windows Vista/Windows 7 Support
05-15-2011 10:56 PM
Data Recovery after RAID 5 Failure -Advanced RAID Server Data Recovery RAID 5 is one of the implementations of RAID used primarily. This array provides data striping at the byte level with parity distributed or interlayer. Due to the availability of error-correcting bandwidth, RAID 5 is a high performance, fault-tolerant system. However, a RAID 5 array can be...
Hard Drive Support
03-02-2011 03:03 AM
Raid 5 Data Recovery What To Do When Raid Fails If you're a big corporate house, you must know about Raid 5 data recovery because RAID is a kind of storage commonly seen in corporate high end computers. Redundant Array of Independent Disks (RAID) is a technology that allows multiple disks to divide and replicate data, thus, perform ...
Hard Drive Support
03-02-2011 02:36 AM
RAID configuration on HP Proliant DL360 G7 server? Hello,
I am planning the hard drive installation for a server rebuild. I plan to use raid 5 on as many volumes as possible but since the server only has 8 2.5" SAS drive bays, there is only the possibility for 2 RAID 5 setups and then space for an additional raid 0 or 1.
I will be installing...
Windows NT/2000/2003 Server/2008 Server
02-08-2011 01:31 PM
Creating RAID 0 with SAS hard drives(help!) I will be installing four SAS type hard drives (Serial Attached SCSI hard drives)into a desktop PC and I will be creating a RAID 0 array. But because they're SAS type hard drives, I will need to use a RAID controller card which I have purchased also since there isn't any motherboard that I know of...