Go Back   Tech Support Forum > Automotive Center > Automotive Support

Mazda mx6 timing the cams and pulleys

This is a discussion on Mazda mx6 timing the cams and pulleys within the Automotive Support forums, part of the Tech Support Forum category. Ok, I have replaced the four cams and new pulleys. The front bank of cylinders works out fine, the cam


Reply
 
Thread Tools Search this Thread
Old 08-03-2009, 04:16 PM   #1
Registered Member
 
Join Date: Aug 2009
Posts: 1
OS: xp



Ok, I have replaced the four cams and new pulleys. The front bank of cylinders works out fine, the cam marks line up and when u put on the pulley the pulley mark also lines up perfect and all valves are closed.... But the rear bank, after u line up marks on cam gears, when u put the pulley on the mark is about 100 degrees off? Is this normal? Do I have to turn the cam to line upthe pulley mark now and then put belt on? Doing this loads up the valves and all are not closed now?? I have the haynes book but it mentions nothing about this. If it is not right what could be happening here. Why the pulley does not line up? Thanks, Rick Car is a 1994 mx6 2.5 liter. dohc

__________________
Rickbengi is offline   Reply With Quote
Old 08-04-2009, 02:16 AM   #2
Moderator Automotive Center
 
octaneman's Avatar
 
Join Date: May 2009
Posts: 2,723
OS: WINXP



Hi Rickbengi

Goto this website http://www.autozone.com/autozone/hom...uestid=1159585

It's free , sign up and you will find all information on how to install the timing belt on your Mazda.
__________________
octaneman is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is on
Smilies are on
[IMG] code is on
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Post a Question


» Site Navigation
 > FAQ
  > 10.0.0.2


All times are GMT -7. The time now is 03:35 AM.


Copyright 2001 - 2014, Tech Support Forum

Windows 7 - Windows XP - Windows Vista - Trojan Removal - Spyware Removal - Virus Removal - Networking - Security - Top Web Hosts