 |
02-27-2007, 03:34 PM
|
#1
|
|
TSF Enthusiast
Join Date: Jun 2004
Location: Sydney Australia
Posts: 7,827
OS: Windows 7-Ultimate 64 Bit
|
Laptop Recovery Instructions
Here is the standard Acer Recovery Instructions
1. Power on the machine
2. At the white ACER BIOS screen, hold the “Alt” key and press the “F10” key simultaneously to start Acer eRecovery
3. Once eRecovery has loaded, click “Restore to Factory Default Settings”
4. Click “OK” to continue
5. From here, the eRecovery process will update all the data on the C: drive and restore a fully functional factory image (approximately 10 minutes).
6. Once eRecovery has run, press “OK” to reboot unit
__________________
Brian
|
|
|
03-28-2007, 10:43 AM
|
#2
|
|
TSF Enthusiast
Join Date: May 2006
Location: Boston
Posts: 13,705
OS: Win 3.1, 98, NT 4.0, XP Debian 4.0, Kubuntu 6.06
|
Dell Recovery Instructions
Here are the recovery instructions from Dell.
1. Reboot, and press Ctrl + F11 at the Dell logo.
2. The Dell™ PC Restore by Symantec screen will come up.
3. Select "Restore" or use the Tab key to highlight it and press Enter.
4. if you wish to continue, click "Confirm", or use the Tab key to highlight it and press Enter.
5. When the utility is finished, click "Finish", or use the Tab key to highlight it and press Enter.
__________________
|
|
|
03-29-2007, 07:36 PM
|
#3
|
|
TSF Enthusiast
Join Date: May 2006
Location: Boston
Posts: 13,705
OS: Win 3.1, 98, NT 4.0, XP Debian 4.0, Kubuntu 6.06
|
HP/Compaq Recovery Instructions
Here are recovery instructions for HP/Compaq laptops.
1. Reboot, and repeatedly press F10 at the HP logo until the recovery screen appears.
2. When the recovery screen appears, press "Next" and then "Yes" to perform a non-destructive recovery.
3. To perform a destructive recovery, click "Advanced" and then "Yes".
4. After the recovery is finished, the laptop will reboot.
__________________
|
|
|
03-29-2007, 07:53 PM
|
#4
|
|
TSF Enthusiast
Join Date: May 2006
Location: Boston
Posts: 13,705
OS: Win 3.1, 98, NT 4.0, XP Debian 4.0, Kubuntu 6.06
|
Gateway Recovery Instructions
Here are the Gateway Recovery Instructions.
1. Reboot, and press F11 or the R key to start the recovery process.
2. Select either "Full System Restore (Destructive)" or "Full System Restore (With Backup)"*.
3. Click "Next", and then click "Yes" to confirm the recovery process.
4.Wait for the computer to restore itself. When it is done, click "Reboot" to reboot the computer.
*Full System Restore With Backup preserves data in the My Documents folder, but requires 4 GB of disk space.
__________________
|
|
|
04-23-2008, 03:20 PM
|
#5
|
|
Registered Member
Join Date: Jan 2008
Location: USA
Posts: 12,250
OS: XP SP3, PCLinuxOS2007, Win 7 Ultimate
|
Laptop Recovery for Sony Vaio
When the VAIO logo appears on the computer's screen, briefly press the F10 key on the computer keyboard.
The VAIO Recovery Wizard appears.
Other options here:
http://www.kb.sony.com/selfservice/m...200%2034432948
__________________
|
|
|
04-23-2008, 07:21 PM
|
#6
|
|
Registered Member
Join Date: Jan 2008
Location: USA
Posts: 12,250
OS: XP SP3, PCLinuxOS2007, Win 7 Ultimate
|
Asus Laptop Recovery
Tap on F9 when Asus logo appears.. for details, follow link below:
http://support.asus.com/technicaldoc...e=en-us&NO=498
__________________
|
|
|
04-24-2008, 06:57 PM
|
#7
|
|
Registered Member
Join Date: Jan 2008
Location: USA
Posts: 12,250
OS: XP SP3, PCLinuxOS2007, Win 7 Ultimate
|
Toshiba laptop recovery
__________________
|
|
|
05-13-2008, 11:30 AM
|
#9
|
|
Registered Member
Join Date: Jan 2008
Location: USA
Posts: 12,250
OS: XP SP3, PCLinuxOS2007, Win 7 Ultimate
|
Packard Bell laptop recovery
When the Packard Bell logo appears, press the
F11 key for a few seconds to start the Recovery Program.
__________________
|
|
|
05-13-2008, 06:22 PM
|
#10
|
|
Manager, Hardware Team
Join Date: May 2005
Posts: 25,030
OS: win 2000 pro / Win XP pro
|
Re: Laptop Recovery Instructions
http://www.nec-computers.com/support/
Select your model and download the Users Guide. You need to extract the files and open Main.htm. Search for RECOVERY topic.
Example (for i-Select M5210):
Once the NEC logo appears, press the F11 key
|
|
|
05-17-2008, 11:12 AM
|
#11
|
|
Registered Member
Join Date: Jan 2008
Location: USA
Posts: 12,250
OS: XP SP3, PCLinuxOS2007, Win 7 Ultimate
|
EI Systems laptop recovery instructions
To start the recovery, press the F10 key when you first turn on your computer. Tap F10 repeatedly until you see ' Starting System Recovery'.
From there you can choose to do Format or a Non-destructive recovery.
For more information on EI Systems 3085 recovery (may work with other models), refer to this website.
__________________
|
|
|
03-14-2009, 06:45 PM
|
#12
|
|
Registered Member
Join Date: Jan 2008
Location: USA
Posts: 12,250
OS: XP SP3, PCLinuxOS2007, Win 7 Ultimate
|
Re: Laptop Recovery Instructions
__________________
|
|
|
 |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|

|