IP video network server setup

[gidw321]

I am trying to set up any IP video network server this is a IP video 9100 A I get it to work in my network but I cannot get it to work outside my network I tried configuring my wireless router Linksys port Forwarding and opening ports but I can still do's not get it to work in the manual said it says I can add up a www.DynDNS.org account I did that but I can still not get it to work on the set of page


It wants the HTTP Proxy have no idea where to get them from does anybody have any suggestions thank you

[Skie]

I don't think you need to set up a Proxy. Make sure you've opened the right port(s) on your router. Also, make sure you're visiting the right IP address when outside your network.

[gidw321]

hi thank you for your response I opened port 443 and 80 and I checked to see if they were open and they are incoming and outgoing I visit both IP addresses one that is a sign with the server and my regular ip address can you tell me what is a HTTP Proxy one of the configurations and I can use www.DynDNS.This is what the set up a looks like IP Video V2.39-A
System
User
Motion Detect
Network
this is what the network tab looks like
Network(http://192.168.1.100:443) Back to Video window

IP Assignment (To take effect, system must reboot.)
Lan:
Manually
IP address
Subnet mask
Default gateway
Automatically by DHCP

Wireless lan: Enable
Manually
IP address
Subnet mask
Default gateway
Automatically by DHCP

Dhcp Mail on off
Dhcp Subject

DNS 1
DNS 2
DNS 3
Reboot immediately. Bottom of Form 1


Audio
DDns under this and this is what it looks like
Dynamic DNS (http://192.168.1.100:443) Back to Video window

(DDns Server http://www.DynDNS.org)
Top of Form 1
Enable Disable
UserName
Password
DomainName
Interval(minute)
HTTP Proxy
Proxy Username
Proxy Password
State

Bottom of Form 1