24 HP ELS Briggs & Stratton engine

StumpMaster · 04-13-2009, 08:51 AM

Does anybody know what the valve gap shoud be on the 24 HP ELS Briggs & Stratton engine. Also how to set the governer.

MrChooks · 04-13-2009, 02:02 PM

Hi & welcome to TSF

Have a look at this site - Just put your B&S engine model number in and you should get the operators manual - That should contain the valve gaps you need and governor settings / speeds

http://www.briggsandstratton.com/mai...nual_and_more/

StumpMaster · 04-14-2009, 05:57 AM

Thanks

StumpMaster · 04-15-2009, 01:45 PM

I tried to fine the manual on the 24 HP ELS Briggs & Stratton engine model no# 446677-0125-B1 and can't fine it.

k2skier · 04-15-2009, 02:06 PM

The Intek manual calls for valve clearance of .005 on both valves, cold.
Set #1 to TDC to set 1, and set #2 to TDC to set 2.

StumpMaster · 04-16-2009, 06:07 AM

K2skier man thanks for the info. Not to sound dum but that does TDC stand for? Ireally want to thank you for the info.

MrChooks · 04-16-2009, 11:36 AM

TDC = Top Dead Centre - when the respective piston is at the very top of the cycle and just before it decends back down the bore.

StumpMaster · 04-16-2009, 02:19 PM

Thanks

k2skier · 04-16-2009, 03:51 PM

When both valves are closed, at the "other' stroke, both valves are open, watch the lifters.

04-13-2009, 08:51 AM	#1 (permalink)
StumpMaster Registered User Join Date: Apr 2009 Posts: 5 OS: windows xp	24 HP ELS Briggs & Stratton engine Does anybody know what the valve gap shoud be on the 24 HP ELS Briggs & Stratton engine. Also how to set the governer.

04-13-2009, 02:02 PM	#2 (permalink)
MrChooks Gearhead Join Date: Apr 2008 Location: Sydney, Australia Posts: 613 OS: Windows XP Home SP 3 My System	Re: 24 HP ELS Briggs & Stratton engine Hi & welcome to TSF Have a look at this site - Just put your B&S engine model number in and you should get the operators manual - That should contain the valve gaps you need and governor settings / speeds http://www.briggsandstratton.com/mai...nual_and_more/

04-14-2009, 05:57 AM	#3 (permalink)
StumpMaster Registered User Join Date: Apr 2009 Posts: 5 OS: windows xp	Re: 24 HP ELS Briggs & Stratton engine Thanks

04-15-2009, 01:45 PM	#4 (permalink)
StumpMaster Registered User Join Date: Apr 2009 Posts: 5 OS: windows xp	Re: 24 HP ELS Briggs & Stratton engine I tried to fine the manual on the 24 HP ELS Briggs & Stratton engine model no# 446677-0125-B1 and can't fine it.

04-15-2009, 02:06 PM	#5 (permalink)
k2skier Registered User Join Date: Sep 2008 Location: Oregon Posts: 313 OS: XP Home-SP3 My System	Re: 24 HP ELS Briggs & Stratton engine The Intek manual calls for valve clearance of .005 on both valves, cold. Set #1 to TDC to set 1, and set #2 to TDC to set 2.

04-16-2009, 06:07 AM	#6 (permalink)
StumpMaster Registered User Join Date: Apr 2009 Posts: 5 OS: windows xp	Re: 24 HP ELS Briggs & Stratton engine K2skier man thanks for the info. Not to sound dum but that does TDC stand for? Ireally want to thank you for the info.

04-16-2009, 11:36 AM	#7 (permalink)
MrChooks Gearhead Join Date: Apr 2008 Location: Sydney, Australia Posts: 613 OS: Windows XP Home SP 3 My System	Re: 24 HP ELS Briggs & Stratton engine TDC = Top Dead Centre - when the respective piston is at the very top of the cycle and just before it decends back down the bore.

04-16-2009, 02:19 PM	#8 (permalink)
StumpMaster Registered User Join Date: Apr 2009 Posts: 5 OS: windows xp	Re: 24 HP ELS Briggs & Stratton engine Thanks

04-16-2009, 03:51 PM	#9 (permalink)
k2skier Registered User Join Date: Sep 2008 Location: Oregon Posts: 313 OS: XP Home-SP3 My System	Re: 24 HP ELS Briggs & Stratton engine When both valves are closed, at the "other' stroke, both valves are open, watch the lifters.