Briggs and Stratton Intek Series- Problem with throttle

vadimosk · 12-19-2008, 09:55 AM

Hello.

I have any almost new engine Briggs and Stratton Intek Series 1350. But it do not respond for throttle action. I looking for the springs in the operator manual. In manual are two, in my engine also two. In manual are two link control, in my engine also two. I don`t know who ist fault.

Thanks for responds, Michal.
(PS: Sorry for my poor English - i never teach this language. Only from net)

Here are video, photos and the site from manual.

Video on Youtube:
http://www.youtube.com/watch?v=IlXcIB_C5IE

Photos of engine control:

The operation manual page:

k2skier · 12-19-2008, 04:14 PM

Two things to check first; make sure the throttle plate in the carb is free, just move it with your finger tip to make sure it moves freely. Second is to make sure the nut and bolt (562 & 505) on the governor arm, (it has holes for the springs) is tight.

vadimosk · 12-20-2008, 03:37 AM

The problem is solved. I clean the air filter, because the link No. 632 is conroled with the vacuum, no manual control. :-) Uf uf.
Thanks, Michal.

12-19-2008, 09:55 AM	#1 (permalink)
vadimosk Registered User Join Date: Dec 2008 Posts: 2 OS: GNU Ubuntu Linux	Briggs and Stratton Intek Series- Problem with throttle Hello. I have any almost new engine Briggs and Stratton Intek Series 1350. But it do not respond for throttle action. I looking for the springs in the operator manual. In manual are two, in my engine also two. In manual are two link control, in my engine also two. I don`t know who ist fault. Thanks for responds, Michal. (PS: Sorry for my poor English - i never teach this language. Only from net) Here are video, photos and the site from manual. Video on Youtube: http://www.youtube.com/watch?v=IlXcIB_C5IE Photos of engine control: The operation manual page:

12-19-2008, 04:14 PM	#2 (permalink)
k2skier Registered User Join Date: Sep 2008 Location: Oregon Posts: 313 OS: XP Home-SP3 My System	Re: Briggs and Stratton Intek Series- Problem with throttle Two things to check first; make sure the throttle plate in the carb is free, just move it with your finger tip to make sure it moves freely. Second is to make sure the nut and bolt (562 & 505) on the governor arm, (it has holes for the springs) is tight.

12-20-2008, 03:37 AM	#3 (permalink)
vadimosk Registered User Join Date: Dec 2008 Posts: 2 OS: GNU Ubuntu Linux	Re: Briggs and Stratton Intek Series- Problem with throttle The problem is solved. I clean the air filter, because the link No. 632 is conroled with the vacuum, no manual control. :-) Uf uf. Thanks, Michal.