Clarion DXZ725

mgarrison3 · 09-14-2009, 06:16 AM

I'm having an issue with the radio doing a system check everytime I start my vehicle. It started after I had to install a new battery. After the system check completes, the sirius option of the radio isn't available. Sometimes it'll go into another system check as I'm driving and then the sirius will then begin working again. Any ideas as what could be happening.

lcurle · 09-14-2009, 08:00 AM

Take it out of "Demo" Mode

mgarrison3 · 09-15-2009, 05:42 AM

There doesn't appear to be a "Demo" mode. I've gone through the manual and do not see a reference to a demo mode.

lcurle · 09-17-2009, 09:21 PM

did you use a quick harness, or hardwire it? Make sure the red wire off the back of the deck is connected to a switched 12v source and the yellow wire has a constant 12v source.

09-14-2009, 06:16 AM	#1 (permalink)
mgarrison3 Registered User Join Date: Sep 2009 Posts: 2 OS: win xp	Clarion DXZ725 I'm having an issue with the radio doing a system check everytime I start my vehicle. It started after I had to install a new battery. After the system check completes, the sirius option of the radio isn't available. Sometimes it'll go into another system check as I'm driving and then the sirius will then begin working again. Any ideas as what could be happening.

09-14-2009, 08:00 AM	#2 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 593 OS: Xp Pro SP3	Re: Clarion DXZ725 Take it out of "Demo" Mode __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."

09-15-2009, 05:42 AM	#3 (permalink)
mgarrison3 Registered User Join Date: Sep 2009 Posts: 2 OS: win xp	Re: Clarion DXZ725 There doesn't appear to be a "Demo" mode. I've gone through the manual and do not see a reference to a demo mode.

09-17-2009, 09:21 PM	#4 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 593 OS: Xp Pro SP3	Re: Clarion DXZ725 did you use a quick harness, or hardwire it? Make sure the red wire off the back of the deck is connected to a switched 12v source and the yellow wire has a constant 12v source. __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."