cd player problem

CoreyJames19e · 07-23-2009, 05:57 AM

I have a nissan maxma 1990 J30

i have pulled old tape player out, has a werid plug so i cut the plug, and started to wire

dose anyone no which one is ground, memory, and current power, along with speakers etc, its all werid, i hooked everything up but it seams the vol allways turns up loud when i turn car on all the time, might be memory, as for ground, at the moment iv wired the ground upto the sig lighters ground

i got a new cd/dvd player combo

also dose anyone have a good place to wire up / mount a uhf radio a small compact one???

thanks

**jaggerwild** · 07-23-2009, 01:00 PM

Quote:

Originally Posted by CoreyJames19e

I have a nissan maxma 1990 J30

i have pulled old tape player out, has a werid plug so i cut the plug, and started to wire

dose anyone no which one is ground, memory, and current power, along with speakers etc, its all werid, i hooked everything up but it seams the vol allways turns up loud when i turn car on all the time, might be memory, as for ground, at the moment iv wired the ground upto the sig lighters ground

i got a new cd/dvd player combo

also dose anyone have a good place to wire up / mount a uhf radio a small compact one???

thanks

Need more let me know...........

Constant 12V+ Red/Black
Switched 12V+ Blue
Ground n/a
Illumination Red/Yellow
Dimmer n/a
Antenna Right Rear
Front Speakers 4" x 6" Doors
Left Front (+) White
Left Front (-) Black
Right Front (+) White/Green
Right Front (-) Black/Silver
Rear Speakers 6" x 9" Rear Deck
Left Rear (+) White/Blue
Left Rear (-) Black/Blue
Right Rear (+) White/Red
Right Rear (-) Black/Red

Giving credit to the site that I got that from
http://www.the12volt.com/installbay/stereodetail/1626.html

**lcurle** · 07-23-2009, 02:48 PM

wierd plug...if it had a factory amplifier then you would have needed the harness for that or you will have to re wire the car, or splice the signal wires back together again.

**jaggerwild** · 07-23-2009, 08:35 PM

Isn't that the car with the AMP'S built into each speaker? MAking wiring it a night mere?

**Coolfreak** · 07-23-2009, 08:39 PM

Wouldn't it have been easier to buy a wiring harness for his car?

**lcurle** · 07-24-2009, 07:28 AM

it would have been yes.

**jaggerwild** · 07-24-2009, 02:43 PM

Quote:

Originally Posted by Coolfreak

Wouldn't it have been easier to buy a wiring harness for his car?

Yeah but,

Quote:

i have pulled old tape player out, has a werid plug so i cut the plug, and started to wire

Most likely have to splice it all back.......

07-23-2009, 05:57 AM	#1 (permalink)
CoreyJames19e Registered User Join Date: Jul 2009 Posts: 1 OS: Windows Xp Pro SP2, Windows Vista ENT	cd player problem I have a nissan maxma 1990 J30 i have pulled old tape player out, has a werid plug so i cut the plug, and started to wire dose anyone no which one is ground, memory, and current power, along with speakers etc, its all werid, i hooked everything up but it seams the vol allways turns up loud when i turn car on all the time, might be memory, as for ground, at the moment iv wired the ground upto the sig lighters ground i got a new cd/dvd player combo also dose anyone have a good place to wire up / mount a uhf radio a small compact one??? thanks

07-23-2009, 02:48 PM	#3 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 593 OS: Xp Pro SP3	Re: cd player problem wierd plug...if it had a factory amplifier then you would have needed the harness for that or you will have to re wire the car, or splice the signal wires back together again. __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."

07-23-2009, 08:35 PM	#4 (permalink)
jaggerwild TSF Gearhead (Audio) Join Date: May 2007 Location: NY Posts: 838 OS: Windows XP32 bit/Vista HB 64bit My System	Re: cd player problem Isn't that the car with the AMP'S built into each speaker? MAking wiring it a night mere? __________________ Please if you need help, start a new thread with questions only after reading the first few sticky's up top. http://www.techsupportforum.com/auto...ter/car-audio/ A Link for Viper alarm owners http://www.directed.com/Support/Prod...es/Owners.aspx

07-23-2009, 08:39 PM	#5 (permalink)
Coolfreak Mentor, Microsoft Support Join Date: May 2008 Location: Wilkes-Barre, PA Posts: 3,151 OS: Windows XP Pro / Windows Vista / Windows 7	Re: cd player problem Wouldn't it have been easier to buy a wiring harness for his car? __________________ I subscribe to all threads I post in. But, if in case I don't or I forget, and I don't post back within 24 hours, please PM me. I will get back to your thread ASAP. #3 Texas Longhorns 9-0 Everest ~ DBAN ~ UBCD4WIN ~ ImgBurn ~ Memtest86+ ~ HDD Diags

07-24-2009, 07:28 AM	#6 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 593 OS: Xp Pro SP3	Re: cd player problem it would have been yes. __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."