VIPER 971XV Remote Start MT

greekgodchaos · 05-03-2009, 06:06 PM

Hello, I bought my 99 eclipse Manual transmission with a Viper 971xv system installed, and I want to enable the remote start feature, so I disconnected the clutch safety wire so my car can start without a clutch, and now I just need to know how to hook the system up so I can use the remote start. I found a brown and white wire that don't go anywhere and are part of the system (wondering if those have anything to do with it) and I also found a random connector (4-pin female) dangling next to my Viper unit box (but it doesn't plug into any of the ports :/ ) so can anyone shine some light on my little issue? Any help would be GREATLY appreciated. Thank you so much guys, hope to hear from you soon.

~Alex

**jaggerwild** · 05-04-2009, 06:09 PM

Check me sig for an owners manual, make sure all fuses are in place. Sounds like it was disconnected or striped of an add on unit. four pin molex plug, what are the wire colors? I don't have an install manual, I'm sure lee will have it for you and should post up tomorrow morning or mid-day.

I assume it has key less entry and it is working? It's been a while installing a remote starter on a manual, the shop I worked at would make you sign a waver if you really wanted it. As one guy owned a dealers ship and he would not listen to us at the shop, so we installed the remote starter in a brand new Porsche next morninghe called to say the car came through his kitchen wall:)
If it is installed ther needs to be a way to disable it, also the E-Brake should be used at all times even when not needed!!!!!!!!
I personally advise against this but hey its yer car.........

**lcurle** · 05-04-2009, 08:46 PM

1999 Mitsubishi Eclipse Alarm, Remote Starter, Keyless Entry Wiring Information
Constant 12V+ White Ignition Switch Harness
Starter Black/Red Ignition Switch Harness
Ignition Black/White Ignition Switch Harness
Ignition 2 Blue Ignition Switch Harness
Accessory Blue/Black Ignition Switch Harness
Tach Black/Blue Or Blue/Black Coil Pack 2 Cylinder Setting
Neutral Safety Wire Black/White (-) PCM behind Center Console
Brake Switch Green Brake Switch
Trunk Pin Red/Green Driver's Running Board
Parking Lights Green/White (+) Driver's Kick Panel or Fuse Panel
Head Lamp Red (-) Light Switch
Factory Disarm Red/Green (-) ECU Passenger's Kick Panel
Door Trigger Red/Green (-) Courtesy Light or Driver's Kick Panel
Door Lock Brown (-) Behind Fuse Panel or 20 Pin Connector High Driver's Kick Panel
Door Unlock Brown/White (-)
Driver's Lock Blue/Black Driver's Kick Panel
Driver's Unlock Blue/Red Driver's Kick Panel
Passenger Unlock Blue/Red Passenger's Kick Panel
Horn Wire Green/Red (-) Steering Column
Windows Up LF=Green/Red, RF=Brown/Yellow
Windows Down LF=Green/Black, RF=Green/Yellow

**lcurle** · 05-04-2009, 08:47 PM

manual car you can hook the ebrake up to the neutral safety switch so the ebrake has to be set and the car in neutral to start. Just a secondary safety feature I do.

greekgodchaos · 05-05-2009, 01:12 AM

Wow! Thanks a ton guys, I really appreciate all of you being so quick! And I found the installation manual, if anyone needs it i can link it up :)

05-03-2009, 06:06 PM	#1 (permalink)
greekgodchaos Registered User Join Date: May 2009 Posts: 2 OS: win98	VIPER 971XV Remote Start MT Hello, I bought my 99 eclipse Manual transmission with a Viper 971xv system installed, and I want to enable the remote start feature, so I disconnected the clutch safety wire so my car can start without a clutch, and now I just need to know how to hook the system up so I can use the remote start. I found a brown and white wire that don't go anywhere and are part of the system (wondering if those have anything to do with it) and I also found a random connector (4-pin female) dangling next to my Viper unit box (but it doesn't plug into any of the ports :/ ) so can anyone shine some light on my little issue? Any help would be GREATLY appreciated. Thank you so much guys, hope to hear from you soon. ~Alex

05-04-2009, 06:09 PM	#2 (permalink)
jaggerwild TSF Gearhead (Audio) Join Date: May 2007 Location: NY Posts: 838 OS: Windows XP32 bit/Vista HB 64bit My System	Re: VIPER 971XV Remote Start MT Check me sig for an owners manual, make sure all fuses are in place. Sounds like it was disconnected or striped of an add on unit. four pin molex plug, what are the wire colors? I don't have an install manual, I'm sure lee will have it for you and should post up tomorrow morning or mid-day. I assume it has key less entry and it is working? It's been a while installing a remote starter on a manual, the shop I worked at would make you sign a waver if you really wanted it. As one guy owned a dealers ship and he would not listen to us at the shop, so we installed the remote starter in a brand new Porsche next morninghe called to say the car came through his kitchen wall:) If it is installed ther needs to be a way to disable it, also the E-Brake should be used at all times even when not needed!!!!!!!! I personally advise against this but hey its yer car......... __________________ Please if you need help, start a new thread with questions only after reading the first few sticky's up top. http://www.techsupportforum.com/auto...ter/car-audio/ A Link for Viper alarm owners http://www.directed.com/Support/Prod...es/Owners.aspx Last edited by jaggerwild; 05-04-2009 at 06:13 PM.

05-04-2009, 08:46 PM	#3 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 593 OS: Xp Pro SP3	Re: VIPER 971XV Remote Start MT 1999 Mitsubishi Eclipse Alarm, Remote Starter, Keyless Entry Wiring Information Constant 12V+ White Ignition Switch Harness Starter Black/Red Ignition Switch Harness Ignition Black/White Ignition Switch Harness Ignition 2 Blue Ignition Switch Harness Accessory Blue/Black Ignition Switch Harness Tach Black/Blue Or Blue/Black Coil Pack 2 Cylinder Setting Neutral Safety Wire Black/White (-) PCM behind Center Console Brake Switch Green Brake Switch Trunk Pin Red/Green Driver's Running Board Parking Lights Green/White (+) Driver's Kick Panel or Fuse Panel Head Lamp Red (-) Light Switch Factory Disarm Red/Green (-) ECU Passenger's Kick Panel Door Trigger Red/Green (-) Courtesy Light or Driver's Kick Panel Door Lock Brown (-) Behind Fuse Panel or 20 Pin Connector High Driver's Kick Panel Door Unlock Brown/White (-) Driver's Lock Blue/Black Driver's Kick Panel Driver's Unlock Blue/Red Driver's Kick Panel Passenger Unlock Blue/Red Passenger's Kick Panel Horn Wire Green/Red (-) Steering Column Windows Up LF=Green/Red, RF=Brown/Yellow Windows Down LF=Green/Black, RF=Green/Yellow __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."

05-04-2009, 08:47 PM	#4 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 593 OS: Xp Pro SP3	Re: VIPER 971XV Remote Start MT manual car you can hook the ebrake up to the neutral safety switch so the ebrake has to be set and the car in neutral to start. Just a secondary safety feature I do. __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."

05-05-2009, 01:12 AM	#5 (permalink)
greekgodchaos Registered User Join Date: May 2009 Posts: 2 OS: win98	Re: VIPER 971XV Remote Start MT Wow! Thanks a ton guys, I really appreciate all of you being so quick! And I found the installation manual, if anyone needs it i can link it up :)