How do you program the timer on the turbo timer and remote start

Disbedatone · 01-04-2009, 05:31 AM

I just want to set the turbo timer a bit longer and also the remote start. Not sure how to adjust the timer on the turbo timer. And also how do you set the auto start to come on at a certain time without pressing the button. Thanks

Disbedatone · 01-04-2009, 06:28 AM

Oh yea this is for a viper 5900 alarm

jaggerwild · 01-04-2009, 08:18 AM

http://www.directeddealers.com/manuals/og/viper/G3301V_02-05.pdf

Hey man see if this helps you out, need more questions answered let us know........

Disbedatone · 01-04-2009, 12:05 PM

i dont see where it says how to program how long you want the turbo timer to be on

lcurle · 01-05-2009, 08:51 AM

hit Aux and start at the same time

Disbedatone · 01-05-2009, 12:07 PM

I know how to use the turbo timer i just dont know how to make timer longer

lcurle · 01-06-2009, 10:04 PM

I think this is how you program the unit....unsure if you can get into the turbo timer programming from there.
Step 1: Open a door. (a car door... your car ;) )
Step 2: Put the key in the ignition and turn it to the "Run" position.
Step 3: Push & release the program button (the black button in your car - usually located under dash or driver's kick panel) once and then release.
Step 4: Push & hold the program button in (keep holding).
(Unit -should- chirp once)
Step 5: Press and release a button on your remote (this button will be your arm/disarm button)
Step 6: Release the program button.
Step 7: Press & Release the program button.
Step 8: Press & Hold the program button (do not release).
(unit should chirp twice)
Step 9: Press button2 (or the other button) on your remote.
Step 10: Release program button.
Step 11: Turn key off.
(Unit should emit a long chirp to confirm)

01-04-2009, 05:31 AM	#1 (permalink)
Disbedatone Registered User Join Date: Jan 2009 Posts: 4 OS: Xp	How do you program the timer on the turbo timer and remote start I just want to set the turbo timer a bit longer and also the remote start. Not sure how to adjust the timer on the turbo timer. And also how do you set the auto start to come on at a certain time without pressing the button. Thanks

01-04-2009, 06:28 AM	#2 (permalink)
Disbedatone Registered User Join Date: Jan 2009 Posts: 4 OS: Xp	Re: How do you program the timer on the turbo timer and remote start Oh yea this is for a viper 5900 alarm

01-04-2009, 08:18 AM	#3 (permalink)
jaggerwild TSF Gearhead Join Date: May 2007 Location: NY Posts: 818 OS: Windows XP32 bit/Vista HB 64bit My System	Re: How do you program the timer on the turbo timer and remote start http://www.directeddealers.com/manuals/og/viper/G3301V_02-05.pdf Hey man see if this helps you out, need more questions answered let us know........ __________________ Please if you need help, start a new thread with questions only after reading the first few sticky's up top. http://www.techsupportforum.com/auto...ter/car-audio/ A Link for Viper alarm owners http://www.directed.com/Support/Prod...es/Owners.aspx

01-04-2009, 12:05 PM	#4 (permalink)
Disbedatone Registered User Join Date: Jan 2009 Posts: 4 OS: Xp	Re: How do you program the timer on the turbo timer and remote start i dont see where it says how to program how long you want the turbo timer to be on

01-05-2009, 08:51 AM	#5 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 587 OS: Xp Pro SP3	Re: How do you program the timer on the turbo timer and remote start hit Aux and start at the same time __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."

01-05-2009, 12:07 PM	#6 (permalink)
Disbedatone Registered User Join Date: Jan 2009 Posts: 4 OS: Xp	Re: How do you program the timer on the turbo timer and remote start I know how to use the turbo timer i just dont know how to make timer longer

01-06-2009, 10:04 PM	#7 (permalink)
lcurle TSF Gearhead (Audio) Join Date: Oct 2008 Location: Newton, Kansas Posts: 587 OS: Xp Pro SP3	Re: How do you program the timer on the turbo timer and remote start I think this is how you program the unit....unsure if you can get into the turbo timer programming from there. Step 1: Open a door. (a car door... your car ;) ) Step 2: Put the key in the ignition and turn it to the "Run" position. Step 3: Push & release the program button (the black button in your car - usually located under dash or driver's kick panel) once and then release. Step 4: Push & hold the program button in (keep holding). (Unit -should- chirp once) Step 5: Press and release a button on your remote (this button will be your arm/disarm button) Step 6: Release the program button. Step 7: Press & Release the program button. Step 8: Press & Hold the program button (do not release). (unit should chirp twice) Step 9: Press button2 (or the other button) on your remote. Step 10: Release program button. Step 11: Turn key off. (Unit should emit a long chirp to confirm) __________________ Lee - MECP Certified "Any advice given on this forum is intended for helping and assisting the end user with their issue at hand. Personal saftey is important when working on any vehicle."