forthelord1

When I purchased my 99 Explorer the dealer said they did not have any information about the alarm system codes from the previous owner. Of course they told me this meant I need to contact Ford. My problem is that
at various times my vehicle will not start because of the theft detection system. How can I correct this issue?

RIGHTE0US

look for a small switch somewhere under the dash. Click the switch to turn the system off and then pull the fuse. Good Luck

jaggerwild

Usually after market alarms have a starter kill relay, to make this work without the remote you need to remove the alarm. Then find where they spliced into the starter wire and reconnect the leads back together. Fords have a black with blue trace wire for a starter wire, find it where they spliced into it then hook the wire back bypassing the relay they used to "kill" the starter.

__________________
JAGGERWILD