2002 Dodge Ram 2500 V8 5.9 liter GAS

superdave423 · 06-16-2009, 04:42 PM

I've been working on this truck for weeks i put a new crank sensor in at dealer, drove 3 times after brung back home, starting back firing then died since then a new fuel pump tried, ignition pick up coil, distribatur,rotor button still not wanting to run can anybody give me some advice on what i might be able or could check or do thanks?

**octaneman** · 06-17-2009, 12:43 PM

Hi superdave423

Check your connections for any bad grounds,open fuses, with an ohm meter check the coils to see if it's open or shorted. Focus on the ignition module and have it tested, check connections to and from the PCM, use a test light and see if there is power going to the ignition module and coils.

06-16-2009, 04:42 PM	#1 (permalink)
superdave423 Registered User Join Date: Jun 2009 Posts: 2 OS: xp	2002 Dodge Ram 2500 V8 5.9 liter GAS I've been working on this truck for weeks i put a new crank sensor in at dealer, drove 3 times after brung back home, starting back firing then died since then a new fuel pump tried, ignition pick up coil, distribatur,rotor button still not wanting to run can anybody give me some advice on what i might be able or could check or do thanks?

06-17-2009, 12:43 PM	#2 (permalink)
octaneman Mentor Home Support, Gearhead Automotive Center Join Date: May 2009 Posts: 551 OS: WINXP	Re: 2002 Dodge Ram 2500 V8 5.9 liter GAS Hi superdave423 Check your connections for any bad grounds,open fuses, with an ohm meter check the coils to see if it's open or shorted. Focus on the ignition module and have it tested, check connections to and from the PCM, use a test light and see if there is power going to the ignition module and coils.