2002 hyundai santa fe turns over but don't start

mannysarria · 07-12-2008, 08:22 AM

Hi I have a 2002 hyundai santa fe V6 2.7 2x4 drive, my timing belt broke so I replace the motor got it all in got all the conation plugged, but when I turn the key the ecm 10 amp fuse blows out I tried unplugging thing and turning key but blow 6 fuses that was, is there a easer way to fined shorts?????? this car has 4 ecm fuses 1- 10 amp, 1- 15 amp and 2- 20 amp the 10 amp one is the bad one any help would be appreciate.

BUDFAN8 · 07-13-2008, 12:37 AM

first thing to check would be the grounds/earths. if you are sure you bolted them all back on i'd look for a spot in the wiring harness that could have been damaged while installing the new engine. if neither of these are obvious it looks like the old wiring schematic and multi-meter are going to get some quality time.

Bud.

SABL · 07-15-2008, 10:48 AM

Do as BUDFAN8 suggests. Check for pinched/broken/bare wires. A larger fuse (higher capacity) will most likely be the cause for more repairs....costly repairs. I know you didn't mention it but NEVER replace a fuse with a larger fuse. Find the faulty wire/s or electrical component/s and make the needed repairs.

You didn't mention if the replacement motor was new or used. If it was used maybe some of the electrical components were damaged/defective. Take a close look for any damage and swap out the part with your old parts if you still have them.

07-12-2008, 08:22 AM	#1 (permalink)
mannysarria Registered User Join Date: Jul 2008 Posts: 3 OS: xp	2002 hyundai santa fe turns over but don't start Hi I have a 2002 hyundai santa fe V6 2.7 2x4 drive, my timing belt broke so I replace the motor got it all in got all the conation plugged, but when I turn the key the ecm 10 amp fuse blows out I tried unplugging thing and turning key but blow 6 fuses that was, is there a easer way to fined shorts?????? this car has 4 ecm fuses 1- 10 amp, 1- 15 amp and 2- 20 amp the 10 amp one is the bad one any help would be appreciate.

07-13-2008, 12:37 AM	#2 (permalink)
BUDFAN8 Registered User Join Date: Apr 2007 Posts: 192 OS: XP	Re: 2002 hyundai santa fe turns over but don't start first thing to check would be the grounds/earths. if you are sure you bolted them all back on i'd look for a spot in the wiring harness that could have been damaged while installing the new engine. if neither of these are obvious it looks like the old wiring schematic and multi-meter are going to get some quality time. Bud.

07-15-2008, 10:48 AM	#3 (permalink)
SABL Registered User Join Date: Jul 2008 Location: Galena, Ohio Posts: 88 OS: WinXP SP3	Re: 2002 hyundai santa fe turns over but don't start Do as BUDFAN8 suggests. Check for pinched/broken/bare wires. A larger fuse (higher capacity) will most likely be the cause for more repairs....costly repairs. I know you didn't mention it but NEVER replace a fuse with a larger fuse. Find the faulty wire/s or electrical component/s and make the needed repairs. You didn't mention if the replacement motor was new or used. If it was used maybe some of the electrical components were damaged/defective. Take a close look for any damage and swap out the part with your old parts if you still have them.