kosmo

Hi all,

I'm a noob and really don't know where to look anymore.

Since a few days I have an 3Dconnect ATI Radeon 9600 pro and after installing de linux ati drivers my X does work. Everything works fine at first sight, xawtv in small mode works fine and even the game enemy territory does work. However when I put xawtv on full screen he gives up on me.

Xawtv says while starting up in an terminal that dga mode is not supported bij the X server, so I initialised dga and started the x again. When opening xawtv my monitor turned off and logging out or go to init 3 does not help to get my monitor on again..... only a reboot..... By the way I had tried several XF86 configs and nothing worked, the game does work whatever I do with the X server .....??!!

So here are some details about my machine and configuration and maybe someone knows what to do.

hardware
PIII 800
512 MB RAM
3Dconnect ATI Radeon 9600

fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon 9600 Pentium III (SSE)
OpenGL version string: 1.3 (X4.3.0-3.2.8)

xawtv -hwscan
This is xawtv-3.90, running on Linux/i686 (2.4.22-6mdk)
looking for available devices
port 67-67
type : Xvideo, image scaler
name : ATI Radeon Video Overlay

/dev/v4l/video0: OK [ -device /dev/v4l/video0 ]
type : v4l
name : BT878(Terratec TerraTValue Ve)
flags: overlay capture tuner

dmesg
The message would be to big so you can view my dmesg over here:
kpsws.com/dmesg


XF86config
The message would be to big so you can view my XF86Config over here:
kpsws.com/XF86Config-4

I tried with and without dga like explained above....

XAWTV output
This is xawtv-3.90, running on Linux/i686 (2.4.22-6mdk)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
ioctl: VIDIOCCAPTURE(int=1): Invalid argument
ioctl: VIDIOCCAPTURE(int=0): Invalid argument
ioctl: VIDIOCCAPTURE(int=1): Invalid argument
ioctl: VIDIOCCAPTURE(int=0): Invalid argument
[root@robbie root]# xawtv
xawtv xawtv-remote
[root@robbie root]# xawtv
This is xawtv-3.90, running on Linux/i686 (2.4.22-6mdk)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 140 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 451
Current serial number in output stream: 451
[root@robbie root]# xawtv
This is xawtv-3.90, running on Linux/i686 (2.4.22-6mdk)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct

Does someone have any idea??

kind regards robbert

__________________
Trying is the first step towards failure
Homer Simson