reply2priyanka

Hi,

I am working on a project whcih include monitoring of disks for the status of temperature and disk error.

I tried the smartctl and it responds about the disks' health as OK (sounds good!!) with temperature information as "Disabled or not supported".
However, I am looking for the current temperature and error rate.

I had discussion with a group of unix- adminstrators and was suggested that if the machines are loaded with the vendor-specific version of smartctl, that will do.

Here is the list of the controllers:
1. MegaRAID Model: LD 0 RAID1 238G Rev: N661
2. MegaRAID Model: LD 1 RAID1 194G Rev: N661
3. MegaRAID Model: LD 2 RAID0 156G Rev: N661
4. LSILOGIC Model: 1030 IM IM Rev: 1000
5. IBM Model: 25P3495a S320 1 Rev: 1
6. WSI Model: SC-3400 Rev: 334A

Please, help me with the version of smartctl, whcih can allow me to monitor temperature and disk error of the disk systems.

thanks,

Priyanka

reply2priyanka

Hi!!

By mistake, in my last mail, I included the list of disk systems available.
The controllers are as follow:

1. SCSI storage controller: Adaptec AIC-7892A U160/m (rev 2).
2. RAID bus controller: American Megatrends Inc. MegaRAID (rev 2).
3. SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 7)
4. RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 1).

thnx,
priyanka