andylogan

Hi Joe,

This is what I did to recap:
1. I cloned C: to D:
2. I made a quick boot diskette
3. I used the quick boot diskette to choose the d:1,p:1 target to use that to boot - this is where it freezes - doesn't boot into windows. Usually when successful it boots into windows and gives me that successfully cloned message.

4. I have also tried recloning.
5. I looked in the bios boot order as well - what I haven't done is used F12 to use it to boot from there (and not the quick boot diskette). So I might try that later when I have access to the computer.

What's weird are those two extra little partitions on the C: drive - have you seen those before?

Thanks for your help so far!

Andy