|
Re: Failure to boot - Displays "00A1" after POST
* Power Supply – COOLMAX CP-500T EPS12V 500W Power Supply
(+3.3V@30A, +5V@50A, +12V1@18A, +12V2@18A, -12V@1A, +5VSB@2.5A)
* Motherboard – ASRock ALiveNF6G-DVI Socket AM2 NVIDIA NF6100-430 Micro ATX AMD Motherboard
* CPU – AMD Athlon 64 X2 4000+ Brisbane 2.1GHz 2 x 512KB L2 Cache Socket AM2 Processor
* RAM – G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
(Installed in the slots the motherboard manual says to put matching pairs in)
* Video Card(s) – SAPPHIRE 100196L Radeon X1950PRO 512MB 256-bit GDDR3 PCI Express x16 HDCP Video Card
(Just one, not using SLI/Crossfire)
* Hard Drive(s) – Western Digital Caviar SE WD1600JS 160GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive x2
(Planning to use RAID 1, but get the same problem whether using RAID or not)
* Operating System - Microsoft Windows XP Home Sp2b
(But haven't yet gotten to the point where I can begin installation)
|