Sempurna

Hi xsaintseiyax,

You’re most welcome, xsaintseiyax.

Let's run some cleanup and diagnostic scans to make sure we're not leaving anything behind.

Please download CCleaner (freeware) and save it to your desktop:

1. Run the CCleaner installer.
2. During installation process, please UNCHECK "Add CCleaner Yahoo! Toolbar".
3. Once installed, run CCleaner and click the Windows tab.
4. Select the following:
   • Check everything under the Internet Explorer section.
   • Check everything under the Windows Explorer section.
   • Check everything under the System section.
   • Check ONLY Old Prefetch data under the Advanced section.
5. Then, click the Applications tab:
   • UNCHECK everything there.
6. Next, click the Options button, then click the Advanced button:
   • UNCHECK : "Only delete files in Windows Temp folders older than 48 hours".
7. Next, click the Cleaner button, then click the Run Cleaner button (bottom right), then Exit.

CAUTION : Please do NOT use the Issues button. This is a built-in registry cleaner. If you don’t know how to use it, you may cause irreparable damage to your system.


NEXT:

Please do an online scan with Panda ActiveScan:

1. Once you are on the Panda site click the "Scan your PC" button located at the bottom of the page.
2. A new window will open... click the "Check Now" button.
3. Enter your Country.
4. Enter your State/Province.
5. Enter your e-mail address.
6. Select either Home User or Company.
7. Click the big "Free Online Scan" button.
8. If it wants to install an ActiveX component allow it.
9. It will start downloading the files it requires for the scan (Note: It may take a couple of minutes).
10. When the download is complete, click on "Local Disks" to start the scan.
11. When the scan completes, if anything malicious is detected, click the "See Report" button; then "Save Report" and save it to a convenient location. Post the contents of the Panda scan report in your next reply.

NEXT:

Please do an online scan with Kaspersky Online Scanner:

1. Click on Kaspersky Online Scanner.
2. You will be prompted to install an ActiveX component from Kaspersky, click Yes.
3. The program will launch and then begin downloading the latest definition files.
4. Once the files have been downloaded click on Next.
5. Now click on Scan Settings.
6. In the scan settings make sure that the following are selected:
   • Scan using the following Anti-Virus database:
     Extended
   • Scan Options:
     Scan Archives
     Scan Mail Bases
7. Click OK.
8. Now under select a target to scan:
   • Select My Computer.
9. This program will start and scan your system.
10. The scan will take a while so be patient and let it run.
11. Once the scan is complete it will display if your system has been infected.
    • Now click on the Save Report As button.
    • In the File name: field, type kavscan.
    • In the Save as type: field, select Text file (*.txt).
12. Save the file to your desktop.
13. Copy and paste that information in your next post.

Note for Internet Explorer 7 users: If at any time you have trouble with the Accept button of the license, click on the Zoom tool located at the bottom right of the IE window and set the zoom to 75 %. Once the license has been accepted, reset to 100%.


NEXT:

Please download ComboScan by Deckard and save it to your desktop:

• Close all applications and windows (including this one).
• Double-click on comboscan.exe to run it, and follow the prompts.
• When the scan is complete, two text files will open – ComboScan.txt (this one will be maximized) and Supplementary.txt (this one will be minimized).
• Copy (Ctrl + A then Ctrl + C) and paste (Ctrl + V) the contents of ComboScan.txt in your next reply.
• Please attach Supplementary.txt to your post.
• If you are unable to attach Supplementary.txt, then please copy and paste its contents in your post.

NEXT:

Please REBOOT your computer normally into Windows and post these logs in your next reply:

1. The log from the Panda scan.
2. The log from the Kaspersky scan.
3. The logs from ComboScan.

(You might have to paste the logs in multiple posts in the event they are too long and breach the post length of the forum software).

Also, please let me know how things are running now and if you encountered any problems while you were following the directions I posted.