Quote:
Originally Posted by JohnthePilot
Having only 1 IDE slot makes life a bit awkward on this mobo. I assume your OS is on the SATA drive, although you don't say. You also don't make it clear when you say you can't detect the PATA drive or DVD. Is this when you are running Windows or in BIOS?
|
Yes, My Os is off my SATA drive. Neither BIOS nor Windows pick these drives up. However a Floppy drive is somehow detected even though I don't have one.
Quote:
Originally Posted by byroz
I'd suggest checking what the drives are set to, if you look at the back of the Hard Drive and DVD drives you will see some Jumpers, these jumpers change the drives between Master, Slave and Cable Select - going off your diagram - the drive the black connector is plugged into should be master and the drive the grey connector is plugged into should be set to Slave. If you look at the drives there will be a diagram that shows how the Jumpers should be arraged to set Master/Slave on each drive. Also, don't assume the arrangement will be the same for all the drives because it wont be.
|
So In other words, make the burner the master and hdd the slave? Since thats how it's hooked up?