Tech Support Forum - View Single Post - Aopen AK86-L...help?

elf · 08-23-2004, 08:59 AM

I guess this would go under the motherboard forum, but I don't really know because I don't know what my problem is.

I recently purchased an AK86-L mb with an AMD64 3200+ with 2 sticks of 512 non-ecc unbuffered ddr400 (pc3200). At first it wouldn't boot, because my power supply didn't have a little four pin power cable that was required, so i got a new power supply. Now it boots fine, I can get into bios and change settings, but right as it gets to the windows loading screen it bluescreens and restarts.

I tried using different harddrives and different video cards( because i heard people had this sort of problem with their agp cards and the AK86-L) but all to no avail. I have run out of ideas, and the aopen technical support is not being too helpful

.

Hopefully you guys can help
elf

08-23-2004, 08:59 AM	#1 (permalink)
elf Manager, Microsoft Support Join Date: Jul 2002 Location: Knoxville, TN or Austin, TX depending Posts: 7,035 OS: WinXP Pro SP3 and Windows 7 My System	Aopen AK86-L...help? I guess this would go under the motherboard forum, but I don't really know because I don't know what my problem is. I recently purchased an AK86-L mb with an AMD64 3200+ with 2 sticks of 512 non-ecc unbuffered ddr400 (pc3200). At first it wouldn't boot, because my power supply didn't have a little four pin power cable that was required, so i got a new power supply. Now it boots fine, I can get into bios and change settings, but right as it gets to the windows loading screen it bluescreens and restarts. I tried using different harddrives and different video cards( because i heard people had this sort of problem with their agp cards and the AK86-L) but all to no avail. I have run out of ideas, and the aopen technical support is not being too helpful . Hopefully you guys can help elf __________________ If TSF has helped you, Tell us about it! or Donate to help keep the site up! I do not subscribe to threads, so if I stop replying, PM me with a link to your thread so I can find it again.