steve:
i just practiced this trick on an old molex connector >>> that the four pin connector that plugs into any hard drive, cd-rom drive etc
you simply pull the ink guts outta any Bic play point pen to come up with the core that has the ink in it and the ball tip
then you use the opposite end that has the ball point >>>> you use the empty straw tying looking end to push onto the molex connector pin starting at the end opposite the wires
start with old six pin conenctor on old PSU push the ball point pen straw onto one of the pins >>> then gently apply pressure on the wired end and remove the pin from the plastic plug its actually very easy
you will need however to write down the orientaion of the collored wires from the old conenctor
you will most likely need to empty two foru pin molex plugs from the new psu to supply the feeds for the replacment plug
well ?????? LOL
