IEEE 1394 (FireWire, I-Link) Connection There are six wires with connectors coming out from the front-mounted IEEE 1394 port of your case. They consist of 2 sets of twisted pair cables; TPA (Twisted Pair A) and TPB (Twisted Pair B), a power cable (VP), and a ground cable (VG). 1. Locate and identify the pin-out of the IEEE1394 port on your motherboard. 2. Power Pin: Connect the VP connector to it. 3. Ground Pin: Connect the VG connector to it. 4. Data Pins: There are two sets of data pins. Each set consists of a plus and a minus pin. They are usually marked as TPA+ and TPA-, TPB+ and TPB-. a. Connect the TPA+ connector to the TPA+ data pin and TPAconnector to the TPA- data pin. b. Connect the TPB+ connector to the TPB+ data pin and TPBconnector to the TPB- data pin.

__________________
AVG | MEMTEST86 | Zone Alarm | XXCLONE | Adaware | Beyond Compare | Everest
If TSF has helped you, Tell us about it! or Donate to help keep the site up!
Sorry no PM's for problems.[/center]