Ok, here we go.
this is a diagram i drew, and the info to use it, i got the required info from an instruction book of mine.
this is basically the same one that radio shack sells, but, the info i have included makes this unit cover a wider range of uses.
Quote:
For 1-50 watts, 10:1 Reduction:
R1= 10k Ohm
R2= 1k Ohm
For 50-300 watts, 33:1 Reduction:
R1= 33k Ohm
R2= 1k Ohm
For Variable Drive, Replace R2 with 1k Ohm Rheostat.
For a signal Filter, to reduce hum, use 10 Ohm Resistor in R3 location.
|
the line out - and + would be connected to the RCA jacks (red & white plugs) in some fashion.