Tech Support Forum - View Single Post

CausticSushi · 06-30-2009, 05:56 AM

OK so it took me a while to get a BSOD again but here it is in full:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in this stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x0000008E (0xC0000005, 0x8054BFD2, 0xB3D46974, 0x00000000)

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

After i started my pc again this showed up:

A problem has been detected and windows has been shut down to prevent damage to your computer.

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates your might need

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x00000050 (0xA85D89DC, 0x00000001, 0x805C0A35, 0x00000000)

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

06-30-2009, 05:56 AM	#5 (permalink)
CausticSushi Registered User Join Date: Apr 2008 Posts: 23 OS: xp	OK so it took me a while to get a BSOD again but here it is in full: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to be sure you have adequate disk space. If a driver is identified in this stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: * STOP: 0x0000008E (0xC0000005, 0x8054BFD2, 0xB3D46974, 0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance. After i started my pc again this showed up: A problem has been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates your might need If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: * STOP: 0x00000050 (0xA85D89DC, 0x00000001, 0x805C0A35, 0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance. Last edited by dai; 06-30-2009 at 06:23 AM.