BUDFAN8

yes i used the fitting and tubes that came with the new master to bleed before i attached lines. also ive tried bleeding from far to close and cross pattern. a ford tech told me that it needed bled in the cross pattern is why i tried that but i didnt think it was going to work because the front and rear lines arent going to the same point anywhere except in the master its self.

ive also had a guy telling me it is the porportioning valve that is the problem but unless the porportioning valve is in the abs motor i cant find one. the line closest to the firewall goes to the frame into the abs motor then goes to the rear where it splits into 2 lines going into each of the drums. the farest line away from the firewall on the master goes straight to the frame into a T and then to both front calipers. so if there is a porportioning valve i have no idea where it is.


Bud