Tech Support Forum - View Single Post

**octaneman** · 06-11-2009, 10:14 PM

Hi flmike7775

For an oil seal to pop it's either not seating properly, the output shaft is scored which spins it loose and cuts the rubber seal, or excessive oil pressure ( too much oil). One way to stop it is to apply silicon on the outer edges of the seal install and let it dry.

06-11-2009, 10:14 PM	#2 (permalink)
octaneman Mentor Home Support, Gearhead Automotive Center Join Date: May 2009 Posts: 544 OS: WINXP	Re: Toro zmaster output shaft oil seal Hi flmike7775 For an oil seal to pop it's either not seating properly, the output shaft is scored which spins it loose and cuts the rubber seal, or excessive oil pressure ( too much oil). One way to stop it is to apply silicon on the outer edges of the seal install and let it dry.