Tech Support Forum - View Single Post

viridianflare · 06-10-2009, 04:41 PM

I'm finishing up a build and I'm realizing I have a bit of confusion. The connections from the front panel of my case (the power switch, LEDs, reset switch, etc) have an A on one side of wire and an arrow on other, while my motherboard handles everything in pluses and minuses. I figure, on the wire, one of these is the ground wire, but I can't tell.

How should these be plugged into the mobo? Does the ground go in the minus?

Any help would be awesome. Thanks!

06-10-2009, 04:41 PM	#1 (permalink)
viridianflare Registered User Join Date: Jun 2009 Location: Northwest Washington Posts: 13 OS: Windows 7, Linux Ubuntu (Jaunty Jackalope), Windows XP	[Case] Front panel wires I'm finishing up a build and I'm realizing I have a bit of confusion. The connections from the front panel of my case (the power switch, LEDs, reset switch, etc) have an A on one side of wire and an arrow on other, while my motherboard handles everything in pluses and minuses. I figure, on the wire, one of these is the ground wire, but I can't tell. How should these be plugged into the mobo? Does the ground go in the minus? Any help would be awesome. Thanks! Last edited by viridianflare; 06-10-2009 at 04:46 PM.