Tech Support Forum - View Single Post - devilbis 1500 water pressure pump replacement

drmax · 06-04-2009, 05:20 AM

hello. just got my 3.8 hp tecumseh running, and now will attempt to work this pump. i took the pump apart last night, carefully cleaned and reassembled. the orings looked ok, and used again, as i don't have a clue as where to get replacements for the this, so i'll try it 1st as is. my ultimate question is, is there an inexpensive pump to bolt onto this motor, if needed?
this entire project is just that, and i really do not need a washer. so i will not be affording to stick alot into this, when i can get a new unit for under $300.
i already know i need a new wand, which is around $30, so i'm off to a bad start, as far as nickel and diming.
so with the info i've given, is there any advice on pump replacement, other that throwing it all away? thx

06-04-2009, 05:20 AM	#1 (permalink)
drmax Registered User Join Date: Dec 2008 Posts: 69 OS: XP	devilbis 1500 water pressure pump replacement hello. just got my 3.8 hp tecumseh running, and now will attempt to work this pump. i took the pump apart last night, carefully cleaned and reassembled. the orings looked ok, and used again, as i don't have a clue as where to get replacements for the this, so i'll try it 1st as is. my ultimate question is, is there an inexpensive pump to bolt onto this motor, if needed? this entire project is just that, and i really do not need a washer. so i will not be affording to stick alot into this, when i can get a new unit for under $300. i already know i need a new wand, which is around $30, so i'm off to a bad start, as far as nickel and diming. so with the info i've given, is there any advice on pump replacement, other that throwing it all away? thx