Tech Support Forum - View Single Post

diazf0 · 05-26-2009, 05:44 AM

Thanks for your response Octaneman

When I turn the key nothing happens, normal first turn on the key would turn on the lights and little lcd screen showing hours ran etc. Then second turn starts the engine. Currently, I turn the key 1st / 2nd turns with nothing happening - no lights, lcd, nor the engine cranking (it does not try to turn over).

It seems as the battery is dead. So, I bought a new battery and installed. Still no power. I checked and cleaned cables from battery to there end points - connections were secure and in tact (no tears or breaks).

What could cause this.

I noticed that there is a fuse on positive side of the battery connection - could the fuse have gone bad and is causing the no power , similar to a bad / dead battery.

I would appreciate any guidance / suggestions to fix it.

Thanks again and in advance.

05-26-2009, 05:44 AM	#3 (permalink)
diazf0 Registered User Join Date: May 2009 Posts: 2 OS: XP sp3	Re: John Deere L120 has no power Thanks for your response Octaneman When I turn the key nothing happens, normal first turn on the key would turn on the lights and little lcd screen showing hours ran etc. Then second turn starts the engine. Currently, I turn the key 1st / 2nd turns with nothing happening - no lights, lcd, nor the engine cranking (it does not try to turn over). It seems as the battery is dead. So, I bought a new battery and installed. Still no power. I checked and cleaned cables from battery to there end points - connections were secure and in tact (no tears or breaks). What could cause this. I noticed that there is a fuse on positive side of the battery connection - could the fuse have gone bad and is causing the no power , similar to a bad / dead battery. I would appreciate any guidance / suggestions to fix it. Thanks again and in advance.