Tech Support Forum - View Single Post - 01 mazda tribute CEL on "ignition coil A"

whiskeygurl424 · 05-10-2009, 03:29 PM

OK so i have a 2001 mazda tribute. A month ago it began to vibrate/shake so bad the whole car shook. My CEL came on. After havin the code read
" ignition coil A
primary/secondary
secondary circuit malfunction"

I was told to have the coil changed.
I did so and it fixed the problem for a few weeks then the problem started all over again. The CEL came on and it read the same code. So I changed the coil again. It ran good for a day this time then de ja vu! It was running rough. The CEL came on and read the same code again! So I figured maybe the coil I purchased was faulty. I changed it and 3 blocks later the CEL was back once again!! I drove to the part store the code read the same as before. I bought a new coil and spark plug. But this time I swapped out a coil from another cylinder and put the new one in it's place and changed the spark plug.
Later that day the CEL came back on now I know I have a bigger problem than I thought. My coil and plug are fine. What could it be now? Should I change the wires? What could keep triggering the same code to come up?

05-10-2009, 03:29 PM	#1 (permalink)
whiskeygurl424 Registered User Join Date: May 2009 Posts: 1 OS: windows xp	01 mazda tribute CEL on "ignition coil A" OK so i have a 2001 mazda tribute. A month ago it began to vibrate/shake so bad the whole car shook. My CEL came on. After havin the code read " ignition coil A primary/secondary secondary circuit malfunction" I was told to have the coil changed. I did so and it fixed the problem for a few weeks then the problem started all over again. The CEL came on and it read the same code. So I changed the coil again. It ran good for a day this time then de ja vu! It was running rough. The CEL came on and read the same code again! So I figured maybe the coil I purchased was faulty. I changed it and 3 blocks later the CEL was back once again!! I drove to the part store the code read the same as before. I bought a new coil and spark plug. But this time I swapped out a coil from another cylinder and put the new one in it's place and changed the spark plug. Later that day the CEL came back on now I know I have a bigger problem than I thought. My coil and plug are fine. What could it be now? Should I change the wires? What could keep triggering the same code to come up?