Tech Support Forum - View Single Post

grackle · 04-22-2009, 03:32 PM

machine: ASUS P5P800-VM
2.0 G ram
ENlight GP3-300CN-101A power supply
video on board (ASUS)
Intel processor fan
one additional fan blowing out of rear of case
XP Pro

Here in southern AZ, lots of dust. I periodically have to open the case and vacuum the fans when the symptom of a high strong whine appears. Usually vacuuming immediately quiets and cools everything and it is all OK. This time the computer crashed before even allowing access to the BIOS. I can see a message: overclock failed before it clicks off. If I try to reboot, it clicks off immediately; if I wait a few minutes it will begin to boot, but still not stay on long enough to go into the BIOS. I have never set the overclock manually so whatever happens is automatic. I shut down, unplugged and removed the battery; reinstalled and still can't boot. I'm at the limit of what I understand. The ASUS manual says the BIOS will self-correct on reboot but this is not happening. Any help would be appreciated.

04-22-2009, 03:32 PM	#1 (permalink)
grackle Registered User Join Date: Apr 2009 Posts: 2 OS: xp pro	[SOLVED] ASUS P5P overclock failed machine: ASUS P5P800-VM 2.0 G ram ENlight GP3-300CN-101A power supply video on board (ASUS) Intel processor fan one additional fan blowing out of rear of case XP Pro Here in southern AZ, lots of dust. I periodically have to open the case and vacuum the fans when the symptom of a high strong whine appears. Usually vacuuming immediately quiets and cools everything and it is all OK. This time the computer crashed before even allowing access to the BIOS. I can see a message: overclock failed before it clicks off. If I try to reboot, it clicks off immediately; if I wait a few minutes it will begin to boot, but still not stay on long enough to go into the BIOS. I have never set the overclock manually so whatever happens is automatic. I shut down, unplugged and removed the battery; reinstalled and still can't boot. I'm at the limit of what I understand. The ASUS manual says the BIOS will self-correct on reboot but this is not happening. Any help would be appreciated.