metalguitarman

yeha would say get a fan controller too, you know you could just take that bracket out all togeter and mount the fan on the plexiglass. just a thought, might look a little cooler you know with a grill instead of a big huge pice of metal right there. that is what I would do. just 2 mins of your time. and you should go with something bigger if you going to mount directly onto the glass perhaps 250 mm is too big for most people afterall it takes up 3/4 the glass. but any of these should do http://www.tigerdirect.com/applicati...Sort=0&Recs=10 they are 140s and they all push really good air. and all you really need is like a 3 in hole saw to make the cut into the glass. dont quote me on the 3 my math is really rusty and its like 2 in the morning where im at. oh and if you dont wanna do the glass thing i wouldnt drill into my case unless i was certan that I was never going to change it again... and if one thing that I personally can be certan of is that I will never stop tinkering and taking apart my rig... just throwing that out there.