Tech Support Forum - View Single Post - P5Q-E Overclocking settings

haywired2002 · 03-22-2009, 03:55 PM

I have Following Hardware :
P5Q-E
E8400
4 GB TWIN 2X 2048 - 6400 C5 DHX

i am using these settings :
AI Overclock tuner: MANUAL
CPU Ratio Setting: AUTO
FSB Frequency: 445
PCI-E Frequency: 100
FSB Strap to North Bridge: AUTO
DRAM Frequency: AUTO
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: AUTO

1st Information: 5-5-5-18-3-54-6-3
2nd Information: 8-3-5-4-6-4-6
3rd Information: 14-5-1-6-6

DRAM Static Read Control: DISABLED
DRAM Read Training: DISABLED
MEM. OC Charger: ENABLED
AI Clock Twister: AUTO
AI Transaction Booster: AUTO

CPU Voltage: 1.32
CPU GTL Voltage Reference (0/2): .630
CPU GTL Voltage Reference (1/3): .630
CPU PLL Voltage: 1.58
FSB Termination Voltage: AUTO
DRAM Voltage: 2.0
NB Voltage: 1.14
NB GTL Reference: .630
SBridge Voltage: 1.1
PCIE SATA Voltage: AUTO

Load Line Calibration: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : AUTO
NB Clock Skew : AUTO
CPU Margin Enhancement: OPTIMIZED

Advanced Settings
C1e: Disabled
Max CPUID Value Limit: Disabled
Intel(r) Virtualization tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled

Post screen Goes Good,
BUt i dont get my Multi Boot screen to VIsta and Xp?

03-22-2009, 03:55 PM	#1 (permalink)
haywired2002 Registered User Join Date: Mar 2009 Posts: 25 OS: Vista 64 Bit and Xp	P5Q-E Overclocking settings I have Following Hardware : P5Q-E E8400 4 GB TWIN 2X 2048 - 6400 C5 DHX i am using these settings : AI Overclock tuner: MANUAL CPU Ratio Setting: AUTO FSB Frequency: 445 PCI-E Frequency: 100 FSB Strap to North Bridge: AUTO DRAM Frequency: AUTO DRAM CLK Skew on Channel A1: AUTO DRAM CLK Skew on Channel A2: AUTO DRAM CLK Skew on Channel B1: AUTO DRAM CLK Skew on Channel B2: AUTO DRAM Timing Control: AUTO 1st Information: 5-5-5-18-3-54-6-3 2nd Information: 8-3-5-4-6-4-6 3rd Information: 14-5-1-6-6 DRAM Static Read Control: DISABLED DRAM Read Training: DISABLED MEM. OC Charger: ENABLED AI Clock Twister: AUTO AI Transaction Booster: AUTO CPU Voltage: 1.32 CPU GTL Voltage Reference (0/2): .630 CPU GTL Voltage Reference (1/3): .630 CPU PLL Voltage: 1.58 FSB Termination Voltage: AUTO DRAM Voltage: 2.0 NB Voltage: 1.14 NB GTL Reference: .630 SBridge Voltage: 1.1 PCIE SATA Voltage: AUTO Load Line Calibration: AUTO CPU Spread Spectrum: Disabled PCIE Spread Spectrum: Disabled CPU Clock Skew : AUTO NB Clock Skew : AUTO CPU Margin Enhancement: OPTIMIZED Advanced Settings C1e: Disabled Max CPUID Value Limit: Disabled Intel(r) Virtualization tech: Disabled CPU TM Function: Disabled Execute Disable Bit: Disabled Post screen Goes Good, BUt i dont get my Multi Boot screen to VIsta and Xp?