Tech Support Forum - View Single Post

**wrench97** · 12-02-2008, 01:26 AM

Try hooking the hard drive to the secondary IDE channel on the end of the cable with the jumpers on the drive set to master put the cd drive on the middle of the cable with the jumpers set to slave. Then set Secondary Drive 1 to on in the Bios see if it will boot from the hard drive.

12-02-2008, 01:26 AM	#13 (permalink)
wrench97 Moderator, Hardware Team Join Date: May 2008 Location: S.E. Pennsylvania Posts: 17,945 OS: Win7	Re: Primary Hard Disk Drive 0 not found Try hooking the hard drive to the secondary IDE channel on the end of the cable with the jumpers on the drive set to master put the cd drive on the middle of the cable with the jumpers set to slave. Then set Secondary Drive 1 to on in the Bios see if it will boot from the hard drive. __________________ Power Supply and Selection