Tech Support Forum - View Single Post

**wrench97** · 11-29-2008, 04:52 PM

Try clearing the CMOS usually by unplugging the PC and removing the coin cell battery moving the jumper marked CLR_RTC or Clr_CMS from pins 2&3 to pins 1&2 and back again replace the battery and plug in see if it will boot.
If not do you have another pc to slave the drive in?

11-29-2008, 04:52 PM	#3 (permalink)
wrench97 Moderator, Hardware Team Join Date: May 2008 Posts: 17,896 OS: XPSP3	Re: PC won't boot past Intel P4 Inside logo Try clearing the CMOS usually by unplugging the PC and removing the coin cell battery moving the jumper marked CLR_RTC or Clr_CMS from pins 2&3 to pins 1&2 and back again replace the battery and plug in see if it will boot. If not do you have another pc to slave the drive in? __________________ Power Supply and Selection