Tech Support Forum - View Single Post

gmilkins · 10-31-2008, 06:22 PM

check the BIOS and see if it is detecting it if not you can map the drive. another reason could be they are both set to master or slave, also check the jumper cables. also check the names of the drive they cannot be the same.

check the BIOS and see if it is detecting it if not you can map the drive. another reason could be they are both set to master or slave, also check the jumper cables. also check the names of the drive they cannot be the same.

10-31-2008, 06:22 PM	#3 (permalink)
gmilkins Registered User Join Date: Oct 2008 Location: london Posts: 21 OS: vista service pack 1	check the BIOS and see if it is detecting it if not you can map the drive. another reason could be they are both set to master or slave, also check the jumper cables. also check the names of the drive they cannot be the same. check the BIOS and see if it is detecting it if not you can map the drive. another reason could be they are both set to master or slave, also check the jumper cables. also check the names of the drive they cannot be the same. Last edited by dai; 11-06-2008 at 08:24 AM.