Pharaohz

There is a sticky post at the top of the forums on how to clear the cmos. Follow it to the letter. Missing a step will not clear it. At the part where it says move the jumper. You might need your mobo manual to understand where its talking about. But on some boards there are no jumpers. You may need to get a flat head screw driver and simply touch the two solder points on the motherboard. Just remember to either unplug the computer or flick the switch not he back of the psu. Thats not the 115/230 switch. Dont touch that one. Remember after unplugging/switching the power off to hit your start button a few times. This will release the stored power on the board.