Hi Prophet,
Quote:
|
Originally Posted by Prophet
when you have no connection have you checked your device manager for problems?
|
Yes, no problem assigned!
Quote:
|
Originally Posted by Prophet
Did comcast give you any connection software that might have a troubleshhoter or status checker program?
|
No
Quote:
|
Originally Posted by Prophet
but do you have 2 ethernet ports and if so is one on board and the other a pci card?
|
No, just the one on the mobo. The second one i mentioned is one at the cablemodem. I pointed out this port because of the ENET LED, which is constant on, when the fault occurs!
Quote:
|
Originally Posted by Prophet
Is your computer part of a network?
|
No, just the pc directly ethernet wired to the cablemodem
Quote:
|
Originally Posted by Prophet
Did you happen to install any programs around the same time this problem started?
|
No
Quote:
|
Originally Posted by Prophet
how many programs run at start up?
|
36, but i am always monitor this and disable the programms in autostart after a carefull check if a installed program is using the autostart function.
I am realy looking for a proper cabelmodem manual to improve my LAN settings for the 3C940 chip.
The Q is still if should run the 10Mb/half-duplex or 100Mb/full-duplex.
Thanks!
Christian
__________________
ASUS P4C800-Deluxe (Rev.2.00) BIOS 1019,
ASUS V9570TD Video card, P4 3Ghz Intel 512Mb, Zalman CPU cooler CNPS7000-AlCu,
4x 512Mb Corsair RAM CMX512-3200C2 (DDR Voltage 2,75V), 1x S-ATA Maxtor Diamond Max Plus 80 & 120Gb, DVD-ROM DA-8160B,
DVD-RW GSA-4081B, Antec Truepower 480W, Case Chieftec Midi BX-03B-BB, XP-Pro SP2