Tech Support Forum - View Single Post - re-filling and requisites

Killer Squirrel · 07-07-2008, 09:46 AM

I have been reading a lot about water cooling and might (after currently upgrading my rig) am going to invest in it.

A few questions i have are

1. If i use a (for example) http://www.overclockers.co.uk/showpr...source=froogle, how would i go about re-filling the reservoir, would i pull it out from the front or through the back?

and also

2. In my new set-up i am going to have an Intel Q9450 and overclocking it, with 2 x Gigabyte 3870s. Will a dual 120mm rad be able to cool these components efficiently?

and one last question

3. What components would you recommend, i am going to watercool the graphics cards and my processor, nothing else. I want everything (preferably) inside the case.

Thanks

..Alex

07-07-2008, 09:46 AM	#1 (permalink)
Killer Squirrel Registered User Join Date: Mar 2008 Location: South East England Posts: 72 OS: Windows Vista 32bit Home Premium My System	re-filling and requisites I have been reading a lot about water cooling and might (after currently upgrading my rig) am going to invest in it. A few questions i have are 1. If i use a (for example) http://www.overclockers.co.uk/showpr...source=froogle, how would i go about re-filling the reservoir, would i pull it out from the front or through the back? and also 2. In my new set-up i am going to have an Intel Q9450 and overclocking it, with 2 x Gigabyte 3870s. Will a dual 120mm rad be able to cool these components efficiently? and one last question 3. What components would you recommend, i am going to watercool the graphics cards and my processor, nothing else. I want everything (preferably) inside the case. Thanks ..Alex Last edited by Killer Squirrel; 07-07-2008 at 09:48 AM.