View Single Post
Old 06-14-2008, 08:52 AM   #3 (permalink)
mattinsocal8911
Registered User
 
mattinsocal8911's Avatar
 
Join Date: Dec 2006
Location: Southern California
Posts: 132
OS: WinXP Home SP3


Re: 97 mazda 626 poor acceleration

Quote:
Originally Posted by billyreddog66 View Post
I have a 97 Mazda 626 with a 2.5 v6. I'm having a problem with acceleration, If I feather the pedal and pick up speed gradually, it seems to be ok, but if I take off normally or try to acceterate faster it starts to bog down and sometimes even stalls out, acts like it is out of gas. Any help would be greatly appreciated. Thanks, Billy
Hi Bill, I just wanted to add my thoughts on the issue. I am not an expert but I own a Mazda GLC. On the electrical side, you might try to check the vacuum advance unit for proper operation. With the engine idling connect a vacuum guage to the advance unit and apply vacuum. The timing should be advanced according to the vacuum applied. Replace unit if faulty.
Note, faulty unit will also cause overheating on the freeway.

I have a check for the CAT as well, loosen the exhaust manifold bolts and try the acceleration again. Improvement means the CAT is plugged.
Note the CAT problem was caused by another problem (excess fuel usage?)
Excess fuel damages the CAT.
Later DAZE...

Last edited by mattinsocal8911; 06-14-2008 at 08:56 AM.
mattinsocal8911 is offline   Reply With Quote