dai

just put one of the new sticks in the slot closest to the cpu
reset the cmos
turn the computer off
remove the power lead from the back
take the side off
remove the cmos battery
move the cmos jumper from pins 1 and 2 to pin 2 and 3 and the back to pins 1 and 2
replace the battery
put the side on
replug in the power lead
boot the computer
and see if it boots ok
if it does then add the second stick
check the voltage range for the new ram you may need to ajust it in the bios as the
m/b may default to the wrong voltage

__________________