Quote:
Originally Posted by eneles
Hi 
What was the error message?
Attach a few mini dumps in zip format to your post.
The dump files are located in \Windows\Minidump.
If there are no minidumps:
1. Click Start, point to Settings, and then click Control Panel.
2. Double-click System.
3. Click the Advanced tab, and then click Settings under Startup and Recovery.
4. In the Write debugging information list, click Small memory dump (64k).
How to post an attachment. |
Ok the error messages that are in the Event Viewer-System section are as follows:
(This is after I switched the SATA data cables and the info may be off)
Warning w/yellow triangle..An error was detected on device\Device\Harddisk0\D during a paging operation repeated 76 times total.
Warning "" The device, \Device\Ide\IdePort2,did not respond within the timeout period. 4 times
Warning "" The system faile to flush data to the transaction log. Corruption may occur.
Error w/red sign The device 'WDC WD1600JS-00MHB0' (IDE\DiskWDC_....(I am thinking IDE? I thought it was SATA 2?) )dissapeared from the system without first being prepared for removal.
Error w/red sign The driver detected a controller error on \Device\Harddisk1\D.
Note there are two SATA 2 Hd and one IDE on the RAID controller IT8212 ATA RAID controller.)
The stop error is: STOP: 0x000000F4 (0x00000003, 0x86273540, 0x862736B4, 0x805D11F8) Beginning dump of phisical memory then it restarted after 20- 30 seconds of blue screen total time.
Sorry could not find the minidump:(
Then when i do the last thing about click on mini dump I get the message that there is no page file for C. But, there is it is system managed. Maybe i should reset the page file? or add more space?