Tech Support Forum - View Single Post - Network Conections

faradd · 05-04-2008, 05:11 AM

hi, because you have configured your pc and your pc doesn't have the drivers to adapt to new changes in protocol etc. when you purchased you router did you get an installation cd if so you need to install that cd and follow the instructions because without them you usually cannot connect it to the Internet. when you connect router to pc you need the cd so that it configures your ip to startic and make a default gateway.

by the way what router is it, because you can download the driver for most of them but the cd i would think it crucial to have. also go to start run and type devmgtm.msc and check for any flagges sign normally yello these will indicate if any device is missing drivers.
reply back if you still have problems.

05-04-2008, 05:11 AM	#2 (permalink)
faradd Registered User Join Date: Mar 2008 Posts: 467 OS: windows xp service pack 2, 3.06 ghz, speed 600mhz, ram 512, nvidia 256mb graphics card	Re: Network Conections - Network cable unplugged hi, because you have configured your pc and your pc doesn't have the drivers to adapt to new changes in protocol etc. when you purchased you router did you get an installation cd if so you need to install that cd and follow the instructions because without them you usually cannot connect it to the Internet. when you connect router to pc you need the cd so that it configures your ip to startic and make a default gateway. by the way what router is it, because you can download the driver for most of them but the cd i would think it crucial to have. also go to start run and type devmgtm.msc and check for any flagges sign normally yello these will indicate if any device is missing drivers. reply back if you still have problems.