Tech Support Forum - View Single Post

woodss · 05-03-2008, 10:33 AM

first of all you need to do a cold reset of the machine this will bring back the printer to the factory defaults of both printer and jetdirect.

You need to configure the printer according to the ip address convention you have setup most common is 10.0.0.0 or 192.168.0 you also need to set up the jetdirect from the control panel.

If you dont know how to do that you can find the instructions from the hp website.

05-03-2008, 10:33 AM	#2 (permalink)
woodss Registered User Join Date: May 2008 Location: Sunbury Vic, Australia Posts: 15 OS: Windows Vista	Re: HP Laserjet 5 first of all you need to do a cold reset of the machine this will bring back the printer to the factory defaults of both printer and jetdirect. You need to configure the printer according to the ip address convention you have setup most common is 10.0.0.0 or 192.168.0 you also need to set up the jetdirect from the control panel. If you dont know how to do that you can find the instructions from the hp website.