Tech Support Forum - View Single Post

dai · 05-01-2008, 08:57 PM

reset the cmos
turn the computer off
remove the power lead from the back
take the side off
remove the cmos battery
move the cmos jumper from pins 1 and 2 to pin 2 and 3 and the back to pins 1 and 2
replace the battery
put the side on
replug in the power lead
boot the computer
set it up out of the case on a piece of cardboard where you can get a good look at everything with
cpu
video
ram
speaker
and see if you can get post

05-01-2008, 08:57 PM	#10 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 39,486 OS: vista 32x ultimate retail	Re: Monitor Goes into pwr save at boot reset the cmos turn the computer off remove the power lead from the back take the side off remove the cmos battery move the cmos jumper from pins 1 and 2 to pin 2 and 3 and the back to pins 1 and 2 replace the battery put the side on replug in the power lead boot the computer set it up out of the case on a piece of cardboard where you can get a good look at everything with cpu video ram speaker and see if you can get post __________________