Tech Support Forum - View Single Post - RAM Failure at power on with 2 slots occupied

2wartz · 05-01-2008, 12:26 AM

Hi 2pistolpacker

Ran CPUz. Could not quickly figure out how to save the Memory Tab result so I've typed it out below.The info below is for each 1 x 1GB DIMM in slot 1. Both the same.

CPUz Result - Memory Tag.
Type DDR Channels # Single
Size 1024 MB

Dram Freq 200.0Mhz
FSB DRAM CPU/9
CAS # Latency 3.0 Clocks
RAS to CAS Delay 3.0 Clocks
RAS Precharge 3.0 Clocks
Cycle Time 8 Clocks
Bank Cycle 11 Clocks
Command Rate 2T
DRAM Idle Timer 16 Clocks

The SPD Tag shows
Slot 1 DDR
Slot 2 Empty ( Known )
Module size 1024 MBytes
Max Bandwidth PC3200(200Mhz)
Manufacturer (Blank)
Timings tables shown for 133Mhz, 166 & 200
The results equal the info above for 200MHZ ie 3,3,3,8.
Voltage 2.5v.

Thanks
2wartz

05-01-2008, 12:26 AM	#6 (permalink)
2wartz Registered User Join Date: Apr 2008 Posts: 8 OS: Win XP	Re: RAM Failure at power on with 2 slots occupied Hi 2pistolpacker Ran CPUz. Could not quickly figure out how to save the Memory Tab result so I've typed it out below.The info below is for each 1 x 1GB DIMM in slot 1. Both the same. CPUz Result - Memory Tag. Type DDR Channels # Single Size 1024 MB Dram Freq 200.0Mhz FSB DRAM CPU/9 CAS # Latency 3.0 Clocks RAS to CAS Delay 3.0 Clocks RAS Precharge 3.0 Clocks Cycle Time 8 Clocks Bank Cycle 11 Clocks Command Rate 2T DRAM Idle Timer 16 Clocks The SPD Tag shows Slot 1 DDR Slot 2 Empty ( Known ) Module size 1024 MBytes Max Bandwidth PC3200(200Mhz) Manufacturer (Blank) Timings tables shown for 133Mhz, 166 & 200 The results equal the info above for 200MHZ ie 3,3,3,8. Voltage 2.5v. Thanks 2wartz